Welcome Customer !

Membership

Wenzhou QiMing Stainless Co.,Ltd
Free Member ·1YRS
WenZhou,ZheJiang
Manufacturer

Main Products: Gate Valve|Ball Valve|Other Pipe Fittings

Xwboo>Products

Wenzhou QiMing Stainless Co.,LtdFree·1YRS

  • E-mail

    Info@qmstainless.com

  • Phone

    86-577-86007720

  • Address

    Room No.603, JianShi Bluiding, Wenzhou, Zhejiang

Contact Now

VBN Electric Butterfly Valve

Model
Nature of the Manufacturer
Manufacturer
Product Category
Sanitary Valves
Place of Origin
City, Province
Overview
VBN Electric Butterfly Valve
Product Details

Application

VBN series butterfly valve is a type of flow control device, used to make a fluid start or stop flowing through a section of pipe. It is well applied to stainless steel pipe systems for food,

beverage, dairy, brewing, pharmaceutical, biopharmaceutical and chemical industries.

 

Materials

  • Valve wet parts: SS304 or SS316L

  • Disc: SS304 or SS316L

  • Other steel parts: SS304 or SS316L

  • Seal: EPDM, Silicon or FPM

           Finish: Semi-bright

           Actuator: SS304

 

Standard Design

          The actuator is made in three standard versions, normally closed (NC), normally open (NO) and air/air activated(A/A).

          Manually handle locks the valve in 3 position: Full open, half open and closed.*

          *For different handles type, see Handle Available.

 

Technical Specification

  • Valve

  • Max. product pressure: 1000kPa(10Bar) for DN15-DN100, 800kPa(88Bar) for DN125-DN150

  • Min. product pressure: Full vacuum, EPDM

  • Temperature range: -10℃ to +120℃

  • Actuator

  • Max. air pressure: 700kPa(7Bar)

  • Min. air pressure, NC and NO: 400kPa(4Bar)

  • Temperture range: -25℃ to +90℃

  •  

 

Parameters

Steel material

Product wetted steel parts

AISI 316L / 304 forged
(1.4306 / 1.4404)

Provided with material inspection report

Other steel parts

AISI 304

Seal material

Standard

EPDM

All seal materials comply with FDA 21CFR117.2600

Options

VMQ / FPM

Pressure

Working pressure

≤10bar (145psi)

Supply pressure for air actuator

5 ~ 8bar (70 ~ 116psi)

Temperature

Working temperature

EPDM: 14 ~ 248°F (-10 ~ 120℃)
VMQ: -58 ~ 356°F (-50 ~ +180℃)
FPM: -22 ~ 446°F (-30 ~ +230℃)
Other materials are available upon request

Sterilization temperature

302°F (150℃, Max. 20 min)

Surface treatment

Inside surface treatment

Ra 16 ~ 32µin (0.4 ~ 0.8µm)

Outside surface treatment

Ra32 ~ 64µin (0.8 ~ 1.6µm)

Connection

The welding diameter

Welding ends: 
DIN 11850-2 with 11850-1 / SMS / 3A / ISO Series, etc.

End connections: butt-welded, sanitary clamp, male and female threaded, flanged, I-line or others upon request.