VBN Butterfly Valve With Micro Adjust Handwheel
Application
Micro Adjust Butterfly Valve is made of SS304/SS316L and is infinitely adjustable. Micro Adjust Handwheel is a very unique valve that allows you to dial in the precise flow that you require for your application.
We offer this valve in sizes 1″ to 4″ with either Silicone, EPDM or Viton seats
Materials
Body Materials: AISI-304 or AISI-316L
Gasket Material:Silicon, EPDM, VITON, NBR
Valve seat and gasket comply with FDA 21CFR177.2600
Standard Design
Standard Avaliable: DIN, SMS, ISO / IDF, BS / RJT, and ASME / BPE.
Available in sizes from DN15 / 1/2" to DN250 / 10"
End connection: Butt-weld, Clamp, Male, Nut, Liner or Flange or others upon request.
Handle: plastic pull handle (2-4 positions) or plastic/stainless steel squezee handle (13 positions)
Actuator: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), electric actuator.
Control: position sensor, C-top controller, C-top controller (AS-I)
Manual handle, pneumatic actuator and electric actuator are interchangeable.
Technical Specification
Max. pressure: 10bar (145psi) DN25 ~ 100; 8bar (120psi) DN125 ~ 150
Temperature range: 14 ~ 248°F (-10 ~ 120°C), EPDM
Surface treatment: Ra 16 ~ 32µin (0.4 ~ 0.8µm)
Supply pressure for air actuator: 70 ~ 115psi
Parameters |
Steel material | Product wetted steel parts | AISI 316L / 304 forged (1.4306 / 1.4404) | Provided with material inspection report |
Other steel parts | AISI 304 |
Seal material | Standard | EPDM | All seal materials comply with FDA 21CFR117.2600 |
Options | VMQ / FPM |
Pressure | Working pressure | ≤10bar (145psi) |
Supply pressure for air actuator | 5 ~ 8bar (70 ~ 116psi) |
Temperature | Working temperature | EPDM: 14 ~ 248°F (-10 ~ 120°C) VMQ: -58 ~ 356°F (-50 ~ +180°C) FPM: -22 ~ 446°F (-30 ~ +230°C) Other materials are available upon request |
Sterilization temperature | 302°F (150°C, Max. 20 min) |
Surface treatment | Inside surface treatment | Ra 16 ~ 32µin (0.4 ~ 0.8µm) |
Outside surface treatment | Ra32 ~ 64µin (0.8 ~ 1.6µm) |
Connection | The welding diameter | Welding ends: DIN 11850-2 with 11850-1 / SMS / 3A / ISO Series, etc. |
End connections: butt-welded, sanitary clamp, male and female threaded, flanged, I-line or others upon request. |