Manual trunnion mounted ball valves are bonnet bolted and abrasion resistant for high pressure application. Due to the fixed ball and seat ring structure, the valve seat will not bear excessive pressure, so the sealing performance is stable and the service life is long. 1.Brand:JITAI2.Origin: China3.Application: Oil, gas, water4.Certificate: ISO, API, CE, SIL5.Warranty time: 120 days6.OEM & ODM: Yes7.HS CODE: 848180
Product Details
Introduction
Manual trunnion mounted ball valves are bonnet bolted and abrasion resistant for high pressure application. Due to the fixed ball and seat ring structure, the valve seat will not bear excessive pressure, so the sealing performance is stable and the service life is long.
Features
1.Labor-saving operation as the ball is supported by dual bearings to reduce friction;
2.PTFE unisexual material sealing ring is embedded in the stainless steel valve seat, and the end of the metal valve seat is equipped with a spring to ensure sufficient pre-tightening force of the sealing ring;
3.Fireproof sealing ring is set between the ball and the valve seat to form a metal-to-metal seal in case of fire according to AP16FA and API607 standards;
4.When the pressure of the stagnant medium in the valve cavity rises abnormally and exceeds the pre-load of the spring, the valve seat retreats away from the ball to achieve the effect of automatic pressure relief;
5.Drain holes are set up and down the valve body to check whether the valve seat is leaking.
1. Pay attention to the storage environment of the valve. It should be stored in a dry and ventilated room, and both ends of the passage should be blocked.
2. The valve should be inspected regularly, and the dirt on it should be removed, and anti-rust oil should be applied to its surface.
3. The valve after installation and application should be checked and repaired regularly to ensure its normal operation.
4. Check whether the sealing surface of the valve is worn or not, and repair or replace it according to the situation.
5. The sealing performance of the valve should be tested to ensure its performance.
7. The valve in operation should be intact, the bolts on the flange and bracket are complete, the threads are not damaged, and there is no looseness.
8. The packing gland is not allowed to be skewed or have no pre-tightening gap.
FAQ
1.Q: Are you a manufacturer or trading company ?
A: We are a genuine valve factory to offer valves at acceptable cost and assured quality.
2.Q: Can you make tailored products ?
A: Yes, we can customize the valve design, manufacturing and inspection for our clients according to the drawing and technical datasheet.
3.Q: What is your MOQ and common delivery time?
A: Our MOQ is 1 set for general industry valves and 10 sets for customized valves. Delivery time is 7 working days for general valves and 40 working days for customized valves.
4.Q: Can you provide technical drawing and tender datasheet?
A: Yes, we are capable of dealing with tender orders under our brand in global areas. We offer one-stop technical support and send you quickest proposal once you become our longterm partner, agent and distributor.
5.Q: How can you help with our installation and start-up?
A: We offer complete literature, videos, operation manuals to give lengthy guidance. Furthermore, our technicians can be dispatched for site job as per the request.