Welcome Customer !

Membership

Sinocera Piezotronics Inc.
Free Member ·1YRS
YangZhou,JiangSu
Manufacturer

Main Products: Pressure Sensor|Transducer

Xwboo>Products
Product Categories

Sinocera Piezotronics Inc.Free·1YRS

  • E-mail

    export@china-yec.com

  • Phone

    86-514-87322487

  • Address

    42 Wugang Rd, Yangzhou, Jiangsu, P. R. China

Contact Now

CWY-DO-502 Eddy Current Displacement Sensor

Model
Nature of the Manufacturer
Manufacturer
Product Category
Place of Origin
City, Province
Overview
Product Details
Features:
An eddy current sensor is a non-electrical electrical measuring device capable of converting mechanical displacement or vibration amplitude into electrical signal output. It consists of a probe (sensor), an extension cable, and a converter (front end). It has the advantages of wide frequency response, wide linear measurement range, small size, strong anti-interference ability, convenient installation and use, and long-term continuous and stable work. In particular, it has the characteristics of non-contact measurement, which will facilitate the dynamic measurement of rotating bodies such as rotating shafts, and the probe can work in water, oil and other media.
 
● Non-contact measurement
● Simple structure
● Frequency response
● High sensitivity and high resolution
● Strong anti-interference ability
● Large measurement linear range
 
Main Specifications:

Range

0-2mm

Sensitivity and error ( mV / μm )

Not interchangeable

4 ± 10% mV / μm

Mutual   exchange

4 ± 15% mV / μm

Resolution

1μm

Linearity and error

Not interchangeable

≤2%

Mutual   exchange

≤5%

Frequency response

0  to 5 kHz

Temperature sensitivity error

0.1% / ℃ FS

Operating temperature

Probe   head

-30~150 ℃

Front end

-20~65 ℃

Initial clearance

0.1~0.5mm

Probe specifications

Probe diameter

φ8

Mounting thread

M10 × 1

Probe length

60mm

cable length

2 meters

Test Conditions

Power     source

-24VDC

Test material

45 #钢

Ambient temperature

20 ± 5 ℃

Relative humidity

≤80%

Accessories

One protective cap, two nuts M10 × 1