Features:
● Isolated IEPE voltage output
● Simultaneous measurement of temperature and acceleration
● Temperature output is a one-wire digital signal
● Industry site condition detection
Main Specifications:
Acceleration sensor section | |
Vibration sensitivity ( 20 ± 5 ℃) | 25 mV / g |
Measurement range (peak) | ± 100 g |
Lateral sensitivity | ≤5 % |
Frequency response (± 5% ) | 1 to 4,000 Hz |
Installation resonance frequency | 20,000 Hz |
range of working temperature | -40~+120 ℃ |
Temperature response | See temperature curve |
Shock limit (peak) | 1000 g |
Transient temperature response | 8 mg / ° C ( 0.3Hz ) |
Magnetic sensitivity | 1 g / T |
Base strain sensitivity | 0.2 mg / με |
noise | <40 uV (rms) |
Output impedance | <100 Ω |
Power supply | ± 5 to ± 12 VDC |
Midpoint bias voltage | 0 ± 30 mV |
Dynamic Range | ≤ ± 5 Vp |
Base isolation | ≥ 10 8 Ω |
Sensitive material | Piezoelectric Ceramics |
Structural design | Cut |
Temperature sensor section |
Temperature measurement range | -55~+125 ℃ |
Temperature measurement accuracy | ± 0.5 ℃ ( -55~+85 ℃) |
installation | M12 overall bolt |
Housing material | stainless steel |
weight | 83 g |
Output | 1 foot : power supply 2 feet : negative power Pin 3 : Acceleration signal cable 4 feet : temperature signal line 5 feet : ground |
Accessories | |
Sensor certificate | Calibration parameters, frequency response curve |