Axial sensitivity (20 ± 5 ℃) | 50mV / g ± 5% |
Measurement range (peak) | 100g |
Lateral sensitivity | ≤5% |
Frequency response (± 10%) | 1 ~ 10,000 Hz |
Installation resonance frequency | 30,000 Hz |
Temperature response | See temperature curve |
range of working temperature | -20 ~ + 120 ℃ |
Impact limit | 5000g |
Power supply (constant current source) | 12 ~ 24V (DC) |
Working current | + 2 ~ + 10 mA (typically 4 mA) |
Maximum output signal (peak) | ≤ ± 5V |
noise | < 2 mg |
Output impedance | < 100 Ω |
DC bias voltage | 7 ± 1V |
weight | 35 g |
Shell isolation | ≥100M Ω |
Housing material | stainless steel |
installation | M5 |
Sensitive material | Piezoelectric Ceramics |
Structural design | Cut |
output method | Four cores: 1 pin (empty), 2 pins (empty), 3 pins (GND), 4 pins (OUT) |
Accessories | Four-core wire (optional) |
Sensor certificate | Calibration parameters, frequency response curve |