Welcome Customer !

Membership

JAYE HEATER TECHNOLOGY
Free Member ·1YRS
HuiZhou,GuangDong
Manufacturer

Main Products: Electric Heater|Solar Water Heater

Xwboo>Products
Product Categories

JAYE HEATER TECHNOLOGYFree·1YRS

  • E-mail

    info@jaye-industry.com

  • Phone

    86-752-8470846

  • Address

    No. 8, Yunshan West Road, Huicheng District, Huizhou, China

Contact Now

KSD301 Thermostat For Water Dispenser

Model
Nature of the Manufacturer
Manufacturer
Product Category
KSD Thermostat
Place of Origin
City, Province
Overview
KSD301 Thermostat For Water Dispenser
Product Details

The KSD301 temperature control switch is the same line that directly controls the two terminals. It is the same as the power-off switch that controls household lighting bulbs or tubes. After disconnecting a line, connect the two terminals of the KSD301 switch respectively. It can automatically turns on or off according to the temp. change . The control terminal must be as close as possible to the connected object, so as to ensure the sensitivity of the switch.

 

Basic Performance Parameters:

Electrical parameters

AC 220V/16A, 50/60Hz

Temperature characteristics

Operating temperature: -20~300℃ Tolerance: ±1~2℃

Insulation resistance

In the case of applying a DC voltage of 500V, test the insulation resistance between the charged metal and the bakelite shell ≥100MΩ.

 

How to Detect the Thermostat KSD301 of the Water Dispenser?

For example, one is 97 degrees and the other is 89 degrees. How to detect good or bad about the thermostat work?

To detect whether the thermostat is good or not is to see if it can be turned on (off) at the marked temperature. The water dispenser uses an automatic disconnection type thermostat. The thermostat is installed close to the water tank. When the water temperature reaches 97°C, the two contacts in the thermostat are separated, and the current connected to the two pins is disconnected. Then stop heating.

Whether the detection is good or bad, it is to detect whether the contact bounce (open circuit) can occur under the marked temperature (working point).

If you want to check by yourself, you can touch the lower case of the thermostat to a heated object (hot water), connect the DC ends of the pins (10v is enough), and then pay attention to the temperature of the hot water. See if it disconnects at 97 degrees. Generally ± 5 degrees is qualified.  

Hot Tags: ksd301 thermostat for water dispenser, China, manufacturers, suppliers, factory, wholesale, custom, price, electric, high quality

Application-Thermostat

Packing & Delivery

Quality-Thermostat

Similar Product Recommend