Flexible Kapton Polyimide film is one of the best film insulating material in the world. It is made of PMDA and DDE by polycondensation in strong polar solvent, casting into film, and then sub amination. It is yellow and transparent, with a relative density of 1.39-1.45. The glass transition temperature is 280 ℃, 385 ℃ (Kapton) and above 500 ℃, respectively. The tensile strength is 200 MPa at 20 ℃ and more than 100 MPa at 200 ℃. It is especially suitable to be used as the base material of flexible printed circuit board and insulation material of high temperature resistant motor.
Physical and electrical characteristics of PI heating film
Operating voltage range
1~220V AC/DC
General operating ambient temperature range
200℃ (if back adhesive is needed, it depends on the temperature resistance of back glue)
Dielectric Strength
≥1000VAC/MIN
Operating ambient temperature range
-50~300℃
insulation resistance
≥100MΩ
Thickness
0.1~0.52mm
Recommended power density
0.1-0.6W/cm2
Mechanical compressive strength
100KG/ cm2
Max. power density
1.0W/ cm2
Conductor tension
≥80N
Service life
5~10年
Welding point tension
≥20N
Application of Polyimide heating film:
New energy industry (battery);
Communication security industry;
Camera, hard disk video recorder;
Electric power industry, military industry and aerospace industry;