High Electric Resistance Brass Tube Coil Heater For Injection Mould 1. Introduction Hongtai hot runner coil heater use Germany heater wire, United States high-purity magnesium oxide material, and strict process technology. There are various cross section and size for choice, such as square,...
Product Details
High Electric Resistance Brass Tube Coil Heater For Injection Mould
1. Introduction
Hongtai hot runner coil heater use Germany heater wire, United States high-purity magnesium oxide material, and strict process technology. There are various cross section and size for choice, such as square, round and flat, provide high-performance electric heater for heating hot runner mold and other fields.
Heater maximum temperature up to 650 ºC, the integration of temperature thermocouple for the precise temperature control, can provide K, J, E thermocouple, blasting and blackening surface treatment, also can provide bright surface.
2. Characteristics
1) Very good performance of the heating uniformity in the heating area.
2) The inside insulated cover, same as the German GC.
3) The moisture-proof is IP65
4) High insulation (more than 500M ohm) and high pressure resistance (1000V above), can meet special requirement if customers need.
3. Application
hot runner system
plastic industry
packaging machinery
medical equipment
casting process
other electric heating industry
4. Parameter
Spring coil heater (H series)
3.0x3.0 3.3x3.3 4.0x2.0 4.2x2.2 4.5x2.7
Φ3.0
Φ4.0
Φ5.0
3.5x3.5 4.0x4.0
5.0x5.0
Voltage
220V,230V,240V
Power tolerance 115W-200W
+/-10%
Power tolerance 201W-2000W
+5%-10%
Out jacket length
30mm~280mm
Diameter of the inner sleeve/wrapped diameter
10mm~42mm
Unheating length
45mm
Max power density
9W/cm²
Heating Length tolerance
+/-0.05mm
Unheating length tolerance
+/-2.5%
Tolerance ID d ≤20mm
Without inner sleeve:-0.15mm With inner sleeve:0.05mm~0.10mm
Tolerance ID d 20mm~30mm
Without inner sleeve:-0.20mm With inner sleeve:0.05mm~0.10mm
Tolerance ID d ≥30mm
Without inner sleeve:-0.25mm With inner sleeve:0.05mm~0.10mm
Tolerance cross section
+/-0.15mm
+/-0.20mm
Thermocouple
K,J,E
None
Material
304,321,316
Maximum working temperature
650℃
Die electrical strength
800V
1000V
With 20 years experience, Hongtai Alloy is your trusted source for quality high electric resistance brass tube coil heater for injection mould as one of the leading suppliers of various heaters in China. Providing you with the most competitive price, we welcome you to buy the heater from our factory.