，-
E-mail
info@greetwin.com
- Phone
-
Address
Baodeli industrial park, Longhua District, Shenzhen City, Guangdong Province, China
Product Categories
Shenzhen Ruicen Technology Co., Ltd.Free·1YRS
862Mhz Lte Repeater 2W LTE800 WCDMA Gsm Signal Amplifier
NegotiableUpdate on October 26
- Model
- Nature of the Manufacturer
- Other
- Product Category
- Cell Phone Signal Boosters
- Place of Origin
- City, Province
Overview
862Mhz Lte Repeater 2W LTE800 WCDMA Gsm Signal Amplifier
Product Details
- China
- GREETWIN
- SGS, ISO9001,CE,ROHS
- GW-33ICS-LW
- 1pcs
- Negotiable
- Carton with PE Foam
- 3 Working Days After Received Payment
- T/T, L/C, Western Union, MoneyGram
- 5000pcs per Month
2W LTE800 WCDMA ICS repeater phone 3g 4g lte repeater gsm signal amplifier booster signal
Main Features
Traditional outdoor site is often affected by the local installation environment limit so it cannot improve the isolation between the donor antenna and the retransmission antenna. Cause the equipment cannot be erected and normally open, ICS repeater can be very good to solve this kind of problem.
High Gain of Equipment
The traditional wireless outdoor site because conditions by isolation must be greater than the gain of 15dB, cause equipment gain can not be bigger because of impacting by erecting environmental, ICS repeater get rid of the aforementioned influence, Can increase the equipment gain, and achieve the weak signal area normal coverage.
Uplink Squelch Function
The introduction of digital technology and application of software radio programming makes the equipment have the uplink squelch function, greatly reduced the interference to the base station by Repeater.
| Items | Specification | |||
| Uplink | Downlink | |||
| Working frequency bａnd (MHz) | WCDMA | 1920-1980Mhz | 2110-2170Mhz | |
| LTE800 | 832-862Mhz | 791-821Mhz | ||
| Maximum gain(dB) | 85±3dB | 90±3dB | ||
| Output power (dBm) | 27±1 | 33±1 | ||
| Max. ALC level | ≥25dB | |||
| Noise coefficient(dB) | ≤5 | |||
| Transmission delay (μs) | ≤10 | |||
| Frequency tolerance (ppm) | ≤0.05 | |||
| In Bａnd fluctuation (dB) | ≤3 | |||
| Inter-modulation attenuation(dBc) | ≤-45 | |||
| Gain adjustment range (dB) | ≥30 | |||
| Gain adjustment linearity | 10 dB | ±1.0 | ||
| 20 dB | ±1.0 | |||
| 30 dB | ±1.5 | |||
| Port VSWR | ≤1.5 | |||
| Humidity | 95% | |||
| Temperature Range | Operation: -25°C ~ +55°C | |||
| RF interface | N-Female | |||
| Isolation | Isolation less than gain 10dB, EVM≤12% | |||
| Power Supply | 220V AC | |||
| Local monitor RS232 | Real-time alarm for temperature, power supply, LNA, VSWR, self-oscillation, etc. | |||
| Size | 610 X 480 X 185mm | |||
| Weight | 30kg | |||
| Outdoor | IP65 | |||
Compared with the wireless repeater, ICS repeater has the following advantages:
- The antenna isolation requirements can be reduced more than 35dB, Receiving antenna and antenna using the same holding pole, thereby reduce the installation difficulty and cost.
- In the same antenna isolation conditions, the whole machine gain can be increased more than 35dB, to achieve more coverage scope.
- Has uplink noise suppression function, the impact to base station receiver sensitivity is small.
- Has the automatic gain and level control function, ensure the output power is constant.
- No special requirements on the feedback path between the receiving antenna and transmit antenna, can adapt to various installation site.
Compared with fiber optic repeater, ICS repeater has the following advantages:
- Does not need to rely on the fiber resources, can reduce the cost of installation.
- There is no Local unit, reducing failure rate.
-
Compared with frequency shift repeater, ICS repeater has the following advantages:
- Work in the same frequency band, saving frequency resources.
- Don't need OCXO, avoid because of constant temperature crystal aging induced frequency drift.
- There is no Local unit, reducing failure rate.
Application Diagram:
Indoor Coverage:
Outdoor Coverage:
As shown in Figure:
Figure 1 ICS Repeater System Principle Diagram
ICM Module contains: Frequency converter, A/D, D/A, Digital Signal Processing (Interference cancellation).
2W LTE800 WCDMA ICS repeater phone 3g 4g lte repeater gsm signal amplifier booster signal
Main Features
Traditional outdoor site is often affected by the local installation environment limit so it cannot improve the isolation between the donor antenna and the retransmission antenna. Cause the equipment cannot be erected and normally open, ICS repeater can be very good to solve this kind of problem.
High Gain of Equipment
The traditional wireless outdoor site because conditions by isolation must be greater than the gain of 15dB, cause equipment gain can not be bigger because of impacting by erecting environmental, ICS repeater get rid of the aforementioned influence, Can increase the equipment gain, and achieve the weak signal area normal coverage.
Uplink Squelch Function
The introduction of digital technology and application of software radio programming makes the equipment have the uplink squelch function, greatly reduced the interference to the base station by Repeater.
| Items | Specification | |||
| Uplink | Downlink | |||
| Working frequency bａnd (MHz) | WCDMA | 1920-1980Mhz | 2110-2170Mhz | |
| LTE800 | 832-862Mhz | 791-821Mhz | ||
| Maximum gain(dB) | 85±3dB | 90±3dB | ||
| Output power (dBm) | 27±1 | 33±1 | ||
| Max. ALC level | ≥25dB | |||
| Noise coefficient(dB) | ≤5 | |||
| Transmission delay (μs) | ≤10 | |||
| Frequency tolerance (ppm) | ≤0.05 | |||
| In Bａnd fluctuation (dB) | ≤3 | |||
| Inter-modulation attenuation(dBc) | ≤-45 | |||
| Gain adjustment range (dB) | ≥30 | |||
| Gain adjustment linearity | 10 dB | ±1.0 | ||
| 20 dB | ±1.0 | |||
| 30 dB | ±1.5 | |||
| Port VSWR | ≤1.5 | |||
| Humidity | 95% | |||
| Temperature Range | Operation: -25°C ~ +55°C | |||
| RF interface | N-Female | |||
| Isolation | Isolation less than gain 10dB, EVM≤12% | |||
| Power Supply | 220V AC | |||
| Local monitor RS232 | Real-time alarm for temperature, power supply, LNA, VSWR, self-oscillation, etc. | |||
| Size | 610 X 480 X 185mm | |||
| Weight | 30kg | |||
| Outdoor | IP65 | |||
Compared with the wireless repeater, ICS repeater has the following advantages:
- The antenna isolation requirements can be reduced more than 35dB, Receiving antenna and antenna using the same holding pole, thereby reduce the installation difficulty and cost.
- In the same antenna isolation conditions, the whole machine gain can be increased more than 35dB, to achieve more coverage scope.
- Has uplink noise suppression function, the impact to base station receiver sensitivity is small.
- Has the automatic gain and level control function, ensure the output power is constant.
- No special requirements on the feedback path between the receiving antenna and transmit antenna, can adapt to various installation site.
Compared with fiber optic repeater, ICS repeater has the following advantages:
- Does not need to rely on the fiber resources, can reduce the cost of installation.
- There is no Local unit, reducing failure rate.
-
Compared with frequency shift repeater, ICS repeater has the following advantages:
- Work in the same frequency band, saving frequency resources.
- Don't need OCXO, avoid because of constant temperature crystal aging induced frequency drift.
- There is no Local unit, reducing failure rate.
Application Diagram:
Indoor Coverage:
Outdoor Coverage:
As shown in Figure:
Figure 1 ICS Repeater System Principle Diagram
ICM Module contains: Frequency converter, A/D, D/A, Digital Signal Processing (Interference cancellation).
Similar Product Recommend
