，-
E-mail
info@greetwin.com
- Phone
-
Address
Baodeli industrial park, Longhua District, Shenzhen City, Guangdong Province, China
Product Categories
Shenzhen Ruicen Technology Co., Ltd.Free·1YRS
Phone Signal Booster 20dBM Quad Bａnd B12 B5 B2 B4 Repeater
NegotiableUpdate on October 27
- Model
- Nature of the Manufacturer
- Other
- Product Category
- Cell Phone Signal Boosters
- Place of Origin
- City, Province
Overview
Phone Signal Booster 20dBM Quad Bａnd B12 B5 B2 B4 Repeater
Product Details
- GW-23LGPA-K
- Greetwin
- $387.90
- Neutral Packing
- 5-7 Day
- TT/LC
- 20000PCS
- China
- Greetwin
- CE
- GW-23LGPA-K
- 1 PC
Phone Signal Booster 20dBM Quad Bａnd B12 B5 B2 B4 Repeater
| Specification | Uplink | Downlink | |
| Frequency | LTE 700 MHz | 699-716MHz | 729-746MHz |
| GSM 850 MHz | 824-849MHz | 869-894MHz | |
| PCS 1900 Mhz | 1850-1910Mhz | 1930-1990Mhz | |
| AWS 1700 MHz | 1710-1755Mhz | 2110-2155Mhz | |
| Operation Bandwidth | Wide Band | ||
| Gain | ≥70dB | ≥70dB | |
| Output Power | ≥20dBm | ≥20dBm | |
| MGC (Manual Gain Control) | 70dB Range/1dB step | ||
| Ripple in Band | 8dB | ||
| Noise Figure | ≤ 6dB | ||
| VSWR | ≤2.0 | ||
| Automatic Level Control | 25dB | ||
| Intermodulation Products | ≤ -40dBc | ||
| Spurious Emission | 9KHz~1GHz | ≤ -36dBm/30KHz | |
| 1GHz~12.75GHz | ≤ -30dBm/30KHz | ||
| Frequency stability | ≤ 0.01ppm | ||
| MTBF | > 50000 hours | ||
| Time Delay | ≤1.5μs | ||
| Impedance | 50Ω | ||
| Power Supply | Input: AC 110~240V; Output: DC 9V/5A | ||
| LED Alarm | Power LED | DC ON/OFF | |
| Smart LED | Smart function ON/OFF | ||
| AGC Alarm | Alarm RED when ALC 5dB-10dB | ||
| ISO Alarm | Alarm RED when ALC 20dB-25dB, Then Repeater will Auto Shut Down. Auto restart after two minutes. | ||
| Mechanical Specification | |||
| RF Connector | N-Female | ||
| Power Consumption | 25W | ||
| Operating Temperature | -10℃~ +55℃ | ||
| Environment Conditions | IP40(Indoor) | ||
| Installation Type | Wall Installation | ||
| Dimensions (D x W x H ) | 224*170*65mm | ||
| Weight | ≤ 6.5 KG | ||
The LCD Repeater covers all existing wireless public communications networks:
DCS/LTE 1800MHz, WCDMA 2100MHz,LTE2600Mhz
The LCD Repeaters have many intelligent functions: such as antenna isolation detection, Input & Output signal strength indication, system indication, manual gain control and smart mode. See the detailed introduction listed below:
The Display will auto off if don't touch it in one minute.
1. “GREETWIN"is Company LOGO.
2. Power: Power supply with indicator.
3. Smart: Smart function with indicator. AUTO Mode now.
4. M : “AUTO" switch to “MANU".
5. Sel: Select the working systems ,
long press the button for 2s , will enter into 900M. then setting the gain.
then set the gain 65dB, long press the button for 2s again. 65dB was confirmed.
6. 900MHz: Show the current working system. Press “Sel" to change to the different system for operation.
7. AUTO/MANU: Automatic Mode or Manual gain Mode.
8. AGC: Automatic gain control with indicator.
9. ISO: Isolation inspection with indicator.
10. 63dB/68dB: Real-time gain show in the LCD display.
11. 0dBm/0dBm: Real-time outpower show in the LCD display.
12. UL is Uplink, DL is downlink. “+" is increasing the gain, “-" is decreasing the gain.
Application Diagram
Phone Signal Booster 20dBM Quad Bａnd B12 B5 B2 B4 Repeater
| Specification | Uplink | Downlink | |
| Frequency | LTE 700 MHz | 699-716MHz | 729-746MHz |
| GSM 850 MHz | 824-849MHz | 869-894MHz | |
| PCS 1900 Mhz | 1850-1910Mhz | 1930-1990Mhz | |
| AWS 1700 MHz | 1710-1755Mhz | 2110-2155Mhz | |
| Operation Bandwidth | Wide Band | ||
| Gain | ≥70dB | ≥70dB | |
| Output Power | ≥20dBm | ≥20dBm | |
| MGC (Manual Gain Control) | 70dB Range/1dB step | ||
| Ripple in Band | 8dB | ||
| Noise Figure | ≤ 6dB | ||
| VSWR | ≤2.0 | ||
| Automatic Level Control | 25dB | ||
| Intermodulation Products | ≤ -40dBc | ||
| Spurious Emission | 9KHz~1GHz | ≤ -36dBm/30KHz | |
| 1GHz~12.75GHz | ≤ -30dBm/30KHz | ||
| Frequency stability | ≤ 0.01ppm | ||
| MTBF | > 50000 hours | ||
| Time Delay | ≤1.5μs | ||
| Impedance | 50Ω | ||
| Power Supply | Input: AC 110~240V; Output: DC 9V/5A | ||
| LED Alarm | Power LED | DC ON/OFF | |
| Smart LED | Smart function ON/OFF | ||
| AGC Alarm | Alarm RED when ALC 5dB-10dB | ||
| ISO Alarm | Alarm RED when ALC 20dB-25dB, Then Repeater will Auto Shut Down. Auto restart after two minutes. | ||
| Mechanical Specification | |||
| RF Connector | N-Female | ||
| Power Consumption | 25W | ||
| Operating Temperature | -10℃~ +55℃ | ||
| Environment Conditions | IP40(Indoor) | ||
| Installation Type | Wall Installation | ||
| Dimensions (D x W x H ) | 224*170*65mm | ||
| Weight | ≤ 6.5 KG | ||
The LCD Repeater covers all existing wireless public communications networks:
DCS/LTE 1800MHz, WCDMA 2100MHz,LTE2600Mhz
The LCD Repeaters have many intelligent functions: such as antenna isolation detection, Input & Output signal strength indication, system indication, manual gain control and smart mode. See the detailed introduction listed below:
The Display will auto off if don't touch it in one minute.
1. “GREETWIN"is Company LOGO.
2. Power: Power supply with indicator.
3. Smart: Smart function with indicator. AUTO Mode now.
4. M : “AUTO" switch to “MANU".
5. Sel: Select the working systems ,
long press the button for 2s , will enter into 900M. then setting the gain.
then set the gain 65dB, long press the button for 2s again. 65dB was confirmed.
6. 900MHz: Show the current working system. Press “Sel" to change to the different system for operation.
7. AUTO/MANU: Automatic Mode or Manual gain Mode.
8. AGC: Automatic gain control with indicator.
9. ISO: Isolation inspection with indicator.
10. 63dB/68dB: Real-time gain show in the LCD display.
11. 0dBm/0dBm: Real-time outpower show in the LCD display.
12. UL is Uplink, DL is downlink. “+" is increasing the gain, “-" is decreasing the gain.
Application Diagram
Similar Product Recommend
