23dBm GSM DCS WCDMA LTE2600 Signal Booster 3g 4g Lte

Tri-bａnd 23dBm GSM CDMA800/850 PCS1900 LTE2600 signal booster 3g 4g lte

I don’t know if you have ever encountered the following situation. Sometimes the phone can’t get out in the elevator and there is no signal. After going to the parking lot to make a call, the phone signal is weak, the call is intermittent, and the phone has no signal when passing through the tunnel when riding the train. There is no signal in the mountainous countryside. Traveling in the forest and grassland, the phone has no signal, which seriously affects the quality of instant messaging. How to solve these problems? Install a phone signal amplifier to instantly increase the signal strength of the phone, improve the quality of calls and network, and solve the problem of weak phone signal.

The LCD Repeaters have many intelligent functions: such as antenna isolation detection, Input & Output signal strength indication, system indication, manual gain control and smart mode. See the detailed introduction listed below:

The Display will auto off if don't touch it in one minute.

1. “GREETWIN"is Company LOGO.

2. Power: Power supply with indicator.

3. Smart: Smart function with indicator. AUTO Mode now.

4. M : “AUTO" switch to “MANU".

5. Sel: Select the working systems ,

long press the button for 2s , will enter into 900M. then setting the gain.

then set the gain 65dB, long press the button for 2s again. 65dB was confirmed.

6. 900MHz: Show the current working system. Press “Sel" to change to the different system for operation.

7. AUTO/MANU: Automatic Mode or Manual gain Mode.

8. AGC: Automatic gain control with indicator.

9. ISO: Isolation inspection with indicator.

10. 63dB/68dB: Real-time gain show in the LCD display.

11. 0dBm/0dBm: Real-time outpower show in the LCD display.

12. UL is Uplink, DL is downlink. “+" is increasing the gain, “-" is decreasing the gain.