Welcome Customer !

Membership

HANGZHOU DOOREN TECHNOLOGY CO.,LTD
Free Member ·1YRS
,
Other

Main Products: 开门设备

Xwboo>Products

Remote Control Duplicator

Model
Nature of the Manufacturer
Other
Product Category
Gate Opener Accessories
Place of Origin
City, Province
Overview
Dimensions: 65.5*38.5*14mmVoltage: 6V260-868MHZ remote control duplicatorRolling code/fixed code
Product Details

1-02

Remote control duplicator can copy most of frequency in the market including NICE, FAAC,CAME,LIFTMASTER,DOORHAN etc.


The chipset compability of Remote Control Duplicator

2260(All the manufacturers)

2262(All the manufacturers)

PT2264,5326(All the manufacturers)

SC5262,HT600,HT680,HT6207,HT6010,HT6012,

HT6014,SMC918 Series,527(All the manufacturers)

1527(All the manufacturers)

2240(All the manufacturers)

Parts of singlechip......


Parameters of Remote Control Duplicator

Dimensions: 65.5*38.5*14mm

Voltage: 6V

260-868MHZ remote control duplicator

Rolling code/fixed code

Frequency autoscan

Here is the way of copy


Memory clearance of Remote Control Duplicator

1. Press button 1 and 2 simultaneous until LED flashes 3 times

2. Release button 2 (Keep pressing button 1), and press button 2 slowly for 3 times, LED flashes quickly.

3. Release both button, the duplicator is ready for copying


Duplicating of Remote Control Duplicator

Put duplicator aside of original transmitter, as close as possible.


fixed code remote control of Remote Control Duplicator

Press and hold button 1 of original transmitter, then press and hold button 1 of duplicator until you see the duplicator’s LED flashes means the duplicating succeed.

Repeat above step to the rest buttons. The duplicator will work after duplicating.


Rolling code remote control of Remote Control Duplicator

Press and hold button 1 of original transmitter, then press and hold button 1 of duplicator until you see the duplicator’s LED flashes means the duplicating succeed.

Once 1 button duplicated, the rest buttons will generate automatically, please follow original receiver manual to insert the new duplicator on the receiver.


Resume of Remote Control Duplicator

If you erase the code by mistake, you can resume it by pressing and hold both of the "3" and "4" button on the remote controllers at the same time, after 10 seconds, the LED flashes 2 times and turn off which indicates the code of the copy remote controller is resumed.


1-03



Similar Product Recommend