Wireless Switch

Product introduction:

Over-all Characteristic
• Adopt uniformity frequency, high stability of wireless signal receiving and sending.
• Siludification of PU varnished shell, dapper appearance with anti-off screw.
• Operation frequency 315M, stability better than 10-5.
• Panel pushing with low-power consumption, long service life bettery.
• Three point of trigger pressing design to ensure the effective action.
• With large capacity output avaliable to be used with autodoor, electric lock and access controller.
• Door open within 2s when signal received.
• Wide voltage input of AV/DC12-36V.
• Function switch with voice indicator power indicator turns green to confirm the validity of operation.
• Widely be used for autodoor and door control equpiment.With the wireless signal output,door can be open by the pushing the panel.Easy installation, specailly for the accasion which have the difficult in wire embedding.

Product Over-view

• This product is with the function of coding self-learn. Make sure the code of remote transmitter has been learned into the receiver before using ( 16 kinds of codes can be learned. )

• Operation way: Press the learned button for 1s, indicator turns green. Press any key of the remote transmitter. The transmitter has been learned by the receiver successfully with two flashes of green light appears.

• Delete method: Press the learned button for 5s, turns to green light, all the codes have been deleted successfully ( Can not delete one by one 0.

• Switch off power when switching the function of L-type and M-type.

• Otherwise, the receiver maintains the previous state.

1) The launch indicator ( When trigger effective turns red light )
2) Pushing Panel
3) Dial switch placed inside, prevent the anti-interference by editing different signal code.
4) Fixing screw
5) Learn button
6) Indicator ( With red light when power is on, turns green when signal received )
7) L-type and M-type available for chosen for the output state.
8) Binding post

Technical Parameter