High speed door operator Main features: Notice: Before connecting the system to live wire place make sure the power supply is off. Please make sure the power voltage in the main circuit is the some as controller’s rated voltage. Also please make sure the ground terminal is properly and reliably...
Indoor, away from direct sunlight, dust, corrosive gas, oil and water vapor etc.
Operation Temperature
-10℃~50℃
Weight
5.8Kg
7.5Kg
8.7Kg
Installation Method
Wall Mounted
Rated Output Power
0.75KW
1.5KW
2.2KW
Rated Speed
2,000 rpm
2,000 rpm
1,500 rpm
Rated Torque
3.6Nm
7.2Nm
15Nm
Heating
<30℃
<30℃
<30℃
Working Temperature
-35℃-50℃
-35℃-50℃
-35℃-50℃
Torque Management System
Automatic Torque
Automatic Torque
Automatic Torque
Maximum Operating Width
<16 sq.meter
<30 sq.meter
<60 sq.meter
Limit Mode
Absolute Encoder
Absolute Encoder
Absolute Encoder
Self Locking Mode
Electro Mechanical Brake
Electro Mechanical Brake
Electro Mechanical Brake
Manual Release
Hand Crank
Hand Crank
Handle
Weight
4.9KG
8.1Kg
15.6Kg
Notice:
Before connecting the system to live wire place make sure the power supply is off.
Please make sure the power voltage in the main circuit is the some as controller’s rated voltage. Also please make sure the ground terminal is properly and reliably connect to the ground wire.
DO NOT touch output terminal directly. DO NOT shot circuit the output terminal and out shell.
After the power supply is cut, and before the LCD is off, there still high voltage electricity in the circuit, so DO NOT touch the internal wiring and electronic components.
Internal wiring and electronic components are very sensitivity to staticelectricity, so DO NOT let any object contact the internal wiring and electronic components of motor driver and the main circuit of the touch control panel.