Welcome Customer !

Membership

HANGZHOU DOOREN TECHNOLOGY CO.,LTD
Free Member ·1YRS
,
Other

Main Products: 开门设备

Xwboo>Products

Garage Door Decorative Hardware

Model
Nature of the Manufacturer
Other
Product Category
Garage Door Hardware
Place of Origin
City, Province
Overview
1. Wire Size2. Inside Diameter3. Length of spring4. Wind of spring (Right or left wound)
Product Details

Product introduction OF garage door decorative hardware


Main dimensional tolerances of springs


1. The tolerance of the inner diameter of the spring is equal to that of the basic dimension D1 of the inner diameter ± Industrial gate picture 1.0%.


2. The free length H0 of the spring is the reference dimension.


3. The tolerance of the total number of turns of the spring is equal to that of the total number of turns N1 ± 1.0%。 For the matching spring of manual garage door, the total number of turns shall be strictly controlled, and the tolerance shall be n1 times of the total number of turns ± 0.5%。


4. In the free state, the spring should have no initial tension, and the gap between the rings should be less than 0.2mm, so as to prevent "s" shape bending after installation.



FAQ

1.What is your price of term?

Answer:As factory,we usually quote EX WORKS price;If customers requires FOB,FCA,CFR or CIF price,

customer need to inform us order list so that we can quote accordingly..


2.What is your factory nearest port?

Answer: Our nearest port is Shanghai or Ningbo;

While if customers have container in other port in China like QINGDAO,SHENZHEN,XIAMEN,YIWU etc.,

we can also ship accordingly,but we may need to add more domestic transportation costs etc.


Similar Product Recommend