Motor characteristics:
Specs | Induction gear motor |
Output shaft dia | 18mm |
Output shaft | round shaft, D-cut shaft, key-way shaft |
Running speed | 1350 rpm 1500rpm |
Frequency | 50Hz 60Hz |
Gear Ratio | 3-60 |
Voltage type | Three Phase 220V 380V 440V… |
Gearbox type | Parallel shaft induction gear motor |
Our motors pass multiple tests:
1. Gear detector for comprehensive tests of gears.
2. Vickers and Rockwell hardness tester to retest the hardness and insure the abrasive resistance.
3. Radial runout tester to test the running-in and balance of the motors, to reduce the abrasion and make sure low noise when high speed running.
4. Withstand voltage tester to test electric leakage or above normal voltage.
5. Interturn tester and surge test to test the insulation between turns in motor stator winding. Bold coil makes bigger torque under the same power torque output.
6. Stator comprehensive tester to test the defect after inserted winding, pick out the defectives.
7. Motor comprehensive tester to test if all the data of a motor meet the standard.
8. Dynamometer to test the welding, insulation, power frequency withstand voltage, interturn withstand pressure on any intershot, Arbitrary mode of impact and the number of repeated shocks. Can automatically and multi - waveform corresponding to the determination of other turns withstand voltage test.
9. 99% current test and debug before delivery.