CK20 CK25 CK30Turning Lathe

NegotiableUpdate on October 25

Model

Nature of the Manufacturer: Manufacturer

Product Category: Turning Lathe

Place of Origin: City, Province

Online Consult Contact Information

Overview

1. The integrated base and bed casting has undergone a strict aging treatment, so high accuracy and rigidity is ensured. 2. High precision cartridge type spindle is equipped with a linear cylinder and collet chuck; the spindle rotates smoothly at high speed and Max. Speed is 500 rpm/min turning roughness is up to Ra0.8~0.4. 3. Precision hardened dovetail guideways improve the total rigidity of lathe so that the lathe has high precision and runs smoothly. 4. Precision pretensioned ball screw is located between guide......

Product Details

Product Description

Item		Unit	CK20	CK25	CK30
Capacity	Max swing over bed	mm	φ240
	Max swing over slide	mm	φ120
	Max turning dia.over tool block	mm	φ70
	Max bar dia.	mm	φ20	φ25	φ30
	Max machining length	mm	150
Spindle	Type of spindle nose		/	A2-3	A2-4
	Size of spindle nose	mm	φ45	φ53.975	φ63.513
	Spindle thru-hole	mm	φ26	φ32	φ36
	Thru-hole of spindle draw bar	mm	φ21	φ26	φ31
	Max speed of spindle	rpm	5000
	Work chucking mode		Std. pneum. Collet chuck Opt.: hyd. collet chuck/ 3-jaw chuck
Feed	travel X/Z	mm	200/180
	Repaid traverse X/Z	m/min	15/15
Tool block	Type of tool post		Dovetail comb tool block
	Tool section: turning/boring	mm	12x12/φ25
	Tooling height of tool	mm	35
Motor	Power of spindle motor	kW	2.2/3.7	3.0/3.7
	Torque of spindle motor	Nm	14/23	19/23
	Power of motor X/Z	kW	0.75/0.75
	Torque of motor X/Z	Nm	3.5/3.5
	Power of coolant pump motor	W	150

Standard Accessories

FANUC 0i mate-TD

High precision angular contact ball bearing imported from Japan (front: 3; rear: 2)

Bearings especially for screw imported from Japan

Medium frequency hardened and plastic-coated ways(dovetail type)

precision pretensioned ball screw

pneumatic draw down collet chuck

Linear cylinder

Servo spindle

Automatic lubrication system

Coolant system

pneumatic system

Standard tool post

Automatic pull feeder

Standard chuck

Machine tool adjustment

Tricolored light of machine

Full enclosed protection

Optional Accessories

GSK/SIEMENS/KND controller

4" solid hydraulic 3-jaw chuck from Taiwan(CK20/30)

5" solid hydraulic 3-jaw chuck from Taiwan( CK30)

Automatic chuck

Domestic ball screw

5" hollow rotating air cylinder

Pneumatic

Spindle disc brake unit

Pneumatic/electric drilling/milling unit

Front/rear air blowing

Special tool post

Special chuck

Feeder equipment