The corn flour mill machine is a small flour machine carefully developed by our company's technicians.It has the advantages of low power consumption, high output, advanced technological process and beautiful appearance.
Product Details
Corn is an important food crop in the world, widely distributed in the United States, China, Brazil and other countries.Compared with traditional rice, wheat and other food crops, corn has strong drought tolerance, cold tolerance, barren tolerance and excellent environmental adaptability. Corn has high nutritional value and is an excellent food crop.Because corn resources are extremely rich, cheap and easy to obtain, it has broad market prospects.
Corn flour completely retains the nutrients and conditioning functions of corn, and improves the shortcomings of coarse grain flour foods that are not good in taste and not easy to digest.It can be used to make steamed buns, biscuits, cakes, porridge and other foods with various uses.The corn flour mill machine can grind coarse grains such as corn into flour.
Product Introduction:
It is composed of the main machine grinding system, the Yuanluo system, the wind transportation system, the silo system and the frame, and is equipped with a current display device.Its working process is as follows:
under the action of wind, the raw grain and bran will enter the Shakelong on the upper mill through the air duct , and fall into the closed winder on the upper mill after being rotated. Under the rotating action of the closed air device, it enters the main abrasive hopper. Under the rotation of the feeding roller, the raw material or bran enters between the main grinding and slow rollers . The raw grain or bran is squeezed and milled by the fast and slow rollers and becomes fragments and falls into the hopper of the main machine. Under the action of the wind, the wind pipe is ground down and enters the Luoshang Shakelong , and then falls into the Luoshang airlock after rotating. Under the rotating action of the air lock, it enters the round Luo. Under the action of the brush and the thrust plate, the flour enters the noodle bag through the lower outlet of the roller; under the action of the thrust plate, the bran falls from the exit of the roller end cover into the bran changing and converting unit .Go to the bran silo under the direction of the switch. Performing two or three times is to repeat the grinding cycle.
Feature of Product :
The grinding roller is supported by rolling bearings, with low friction, low energy consumption and high efficiency.
It adopts chain and synchronous belt transmission, stable transmission.
Double feeding rollers are used for feeding, and the feeding is even.
Slow roller clutch and feeding mechanism linkage operation is quick.
Many standard parts are used for parts and components, which is convenient for maintenance.
Reasonable structure, simple operation and convenient use.
Remark:
(1) If processing wheat, the net wheat water content should be controlled between 13.5%-15%.
(2) Prevent all debris from entering the main mill.
(3) If there is any abnormal sound or smell, stop the machine immediately for inspection.
(4) Pay attention to the pink color of the ammeter pointer and the surface.