Automatic Coconut Peeling Machine

NegotiableUpdate on October 22

Model

Nature of the Manufacturer: Other

Product Category: Fruit Processing Machine

Place of Origin: City, Province

Online Consult Contact Information

Overview

The automatic coconut peeling machine is specially designed to remove the skin of green coconuts.It has the characteristics of high efficiency,large desktop volume,easy operation,sanitation and low noise.The material of the contact parts is stainless steel.

Product Details

Young coconut is also known as green coconut. The growth cycle of this coconut is shorter than that of yellow coconut. The juice of the green coconut tastes very sweet and has a good effect of clearing heat and removing fire. Its pulp is also very refreshing and can be made into many delicious dishes.Young coconut milk and coconut meat contain a lot of protein, fructose, glucose, and sucrose. The coconut meat is as white as jade and has an aroma and crispness; the coconut milk is cool and sweet. Coconut meat and coconut milk are delicious fruits for all ages. In addition, it also contains a variety of trace elements, and its carbohydrate content is also very rich.

Because of its wide range of uses, the consumer group of young coconuts is very large. In recent years, with the improvement of people's consumption level and the enhancement of health concepts, the coconut market has also ushered in a new stage of development.In the processing of green coconut, the first step is to process the coconut skin.In terms of coconut processing，traditional manual operations cannot achieve an efficient and stable peeling effect.The emergence of automatic coconut peeling machine is the best choice to solve this problem.

Product Introduction:

The working principle of automatic coconut peeling machine is very simple:

1.Setting parameters.Press “SET" , then press cursor move key to wanted position, press number setting key to set number value. When all indicators light is not flicker, the system would save the set values. Specific operation is as below:Press “SET", when speed screen display A, set the gripping time of coconut, 1-2 seconds would be appropriate;Press “SET", when speed screen display Sb, set the diameter of side peeling, 100-160mm seconds would be appropriate, default is 100mm;Each button must be done in two seconds, Otherwise the machine will automatically save the current settings.

2.Adjustment of diameter and speed.Adjust the side scale to wanted diameter, the diameter range is 100-160mm; refer to “Parameter setting".Press “Start", the machine is peeling automatically.Rotate clockwise, the speed decreases; rotate anticlockwise, the speed increases.

3.Peeling operation.Put coconut on the cone shape plate, press" start" button, peeling starts. If the pneumatic gripper is not on the head, press “ Reset" button.When the pneumatic gripper reaches the peak, finish peeling, take out coconut, then put another one.

In a short word,the automatic coconut peeling machine is easy to operate:just put the coconut into the cone, start the machine, while the coconut is fixed by the upper nail for rotating motion, the side and cone peeling blade will directly peeling the surface of green coconut.

Product Parameter:

Rated rower: 0.8kW
Rated torque: 35N·m
Range of use: 120～230mm
Peeling range: 100～160mm
Operating fluid: Through 40μm filtered compressed air
Operating pressure: 70-100psi(5-7bar)
Gas consumption: 0.05-0.06m³/min
Cutter material: 440C/W12
Working temperature: 0℃～40℃
Working relative humidity: ≤80%

Product Detailed Display：

side peeling blade

cone peeling blade

Fixed knife

Hydraulic oil