Hydraulic oil press is a mechanical equipment that can squeeze out oil by adding oil directly into the oil press barrel.It has the characteristics of simple and fast process, and the oil produced by it has a pure and delicate fragrance.
Product Details
Product Introduction:
The fully automatic hydraulic oil press is the most convenient type of mechanical oil press with the highest oil output rate and the least replacement of wearing parts. It is currently the most advanced equipment that replaces the manual operation of small grinding sesame oil and is especially suitable for The consumer psychology of the majority of customers to spend money to buy real goods (oil + frying + squeezing = sesame oil), use their own oil to process their own safe oil. This hydraulic oil press mainly processes oil crops: sesame, walnut kernels, peanut kernels, pine nuts have the best peeling effect), almonds and other oil crops.
The whole machine is mainly composed of three parts:
1. The main body part:it is composed of bottom plate, column, top plate, press chamber assembly, oil pan, nut and other parts. It is one of the main parts of the whole machine. The oil is in the press chamber assembly and is pushed upward by the force of the cylinder assembly. , The oil flows down from the oil gap in the press chamber, through the oil pan to the oil storage barrel.
2. Transmission hydraulic part:this is the main working power source for this machine to produce high oil rate. It is composed of drive shaft, worm gear, worm, gear pump, high pressure pump relief valve, manual valve, cylinder assembly, pipe joints and other parts. This machine adopts the world's most advanced hydraulic pumping station, Korean plunger pumping station, with high speed, high oil pressure and high temperature resistance. No cooling device is added when the oil temperature is above 65 degrees. It can work continuously, with minimal maintenance probability and low noise , Saving 1/3 of the electricity bill, automatically unloading, and its own power configuration is small. These are the advanced features of this machine.
3. Electrical control part:it is composed of a motor, a voltmeter, a temperature control gauge, a pressure gauge, and power supply insurance.
Feature of hydraulic oil press:
1. The machine is small in size, small in area, easy to learn, easy to understand, easy to operate, and has no special requirements for operators.
2. During the use of this machine, the power consumption is low and various expenses are low.
3. This machine is a hydraulic machine with high pressure, high oil output rate and good oil quality.
4. This machine adopts automatic control system, automatic control of preheating temperature and pressure of hydraulic system.
Oil output rate
sesame
Pine nuts
peanuts
walnuts
42%-52%
45%-60%
36%-42%
50%-60%
The output data listed in the table increases or decreases with the proficiency of the operator, and the quality of the processed raw materials must be ensured to achieve the oil yield.
Product Parameters:
Main Technical Parameters
Name
Hydraulic Oil Press Machine
Model
QT-6ZL-300
Overall Dimensions(mm)
1000*1150*1750
Working Pressure
55MPa
Pushing Force of Working
200t
Inner Diameter of Pressing Barrel
300mm
Working Stroke of Piston
450mm
Capacity of Pressing Barrel
18kg
Average Performance
100kg/h
Main Motor
3kw
Motor of Heating
2kw
Net Weight
1500kg
Finished Product Display:
Sesame oil
Peanut oil
Walnut oil
Remark:
1. To ensure the safe operation of electrical systems, grounding protection measures must be adopted.
2. When the pressure gauge is inoperable or damaged, it is strictly forbidden to start production, and switch on after replacing the new pressure gauge.
3. The machine is not allowed to overhaul electrical appliances during the period of high voltage and pressure maintaining.
4. After the oil is fried, the oil fume must be exhausted, otherwise the oil press will cause a gas explosion, which will hurt people in serious cases.
5. If the oil tank is blocked, please use a thin blade or sewing needle to clean the scraping through.
6. After the new machine is used for one month, the hydraulic oil must be filtered and the oil tank cleaned, and the hydraulic oil must be replaced once a year in the future. Please turn off the main power if you do not use it for a long time.