The T14 series isa an evolution from the T10 series.It allows a further long reach with a staggered staple configuration.This long reach fastener is to joint belts with a high tensile rating and where safety is very important such as with the transport of personnel on the belt.
Product Features
Twin staple fastener.
Good for the deep trough belt whose troughing angle is 45°
Staggered staples to maximize fastener holding.
Complete range:for the belt thickness of 8-16 mm
Made of high strength steel:the strength,rigidity and wear resistance of the fasteners are guaranteed
The "staggered" arrangement of the staples enables a splice with a high tensile and dynamic strength to be installed.The loads are spread across the "staggered" staple arrangement
Therefore,the joints have a high strength and long life.
Easy installation for the fasteners by levermatic fixing tool.
Applications:Under ground and suface coal mining
Technical Parameter
Packaging
10 strips of 200mm width fastener in each box for 1 meter's joint
Installation Requirement
The fastener is installed with a levematic fixing tool.Special instructions are available on request.