Product Features
Solide strip fastener:One complete fastener strip is installed on the belt across the full width preventing loss or damage during transportation and storage.
High strength of th joint:The "staggered" arrangement of the staples enables a splice with a high tensile and dynamic strength to be installed.The loads are spread across the "staggered" staple arrangement
Good alignment of the joint:The fasteners are installed with the hammer tool.Install the fastener on either side and in the centre of the splice ensuring the fasteners are square to the belt and then install the fasteners across the full width.Because of the good alignment,it is very easy for the connecting pin to be inserted.
Less impact force during the operation:The front edge of the fastener is chamfered which decreases the impact and wear to idlers,pulleys and cleaners during the running of the conveyor
Improved life of the pin:The loop section of the fastener is designed to maintain a good even radius after the fastener is clenched,thus providing a good working surface for the connecting pin to interact with.
Application:Heavy-duty conveyor belt,Underground mining,Main haulage,Coal potash.
Technical Parameter
Packaging
2 strips(1 set) of the fastener in each box for 1 joint.
Installation Requirement
The G2002 fasteners and G2003 fasteners can be installed with.
-A hammer tool.
-Or a pneumatic tool.
-Or a hydraulic tool.
Special instructions are required to use these tools.Please contact our sales team or technician to advise you the most suitable installation device for your application.