Welcome Customer !

Membership

DongGuan HongTuo Instruments Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 检测设备

Xwboo>Products

EN-344 Rubber Sole Shoes Bending Resistance Testing Machine

Model
Nature of the Manufacturer
Other
Product Category
Pipe Testing Machine
Place of Origin
City, Province
Overview
Place of Origin: China Brand Name: Dahometer Certification: ISO Model Number: HT-344 ......
Product Details
Name: EN-344 Rubber Sole Shoes Bending Resistance Testing Machine Standards:: EN-344
Bending Angle:: 90 ° Round Shaft Diameter: φ30mm
Bending Speed: 0 ~ 135 Revolutions / Minute Fixture Width: 144mm

EN-344 Rubber Sole Shoes Bending Resistance Testing Machine

Application:

The sole bending tester measures the bending resistance of the sole material under the action of continuous bending. Before the test, a number of holes were punctured in the place where the sole was most bent. The two ends of the sole test piece were fixed between the clamps. During the test, one end of the clamp was fixed and one end was movable. After a certain number of tests, remove the test piece to check the bending change.

Standards:

EN-344

Specification:

Bending angle: 90 °

Round shaft diameter: φ30mm

Bending speed: 0 ~ 135 revolutions / minute

Fixture width: 144mm

Testing at the same time: 3 soles

Counter: LED, 0 ~

Horsepower: DC, 375W

Volume: 85 × 31 × 65cm

Weight: 68kg

Power source: 1∮, AV220V, 3A

EN-344 Rubber Sole Shoes Bending Resistance Testing Machine 0

Similar Product Recommend