Welcome Customer !

Membership

DongGuan HongTuo Instruments Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 检测设备

Xwboo>Products

QB/T 2819-200 Sponge Indentation Fatigue Testing Equipment,Sponge Indentation Fatigue Testing Mac...

Model
Nature of the Manufacturer
Other
Product Category
Sponge Testing Equipment
Place of Origin
City, Province
Overview
Place of Origin: China Brand Name: Dahometer Certification: ISO,SGS Model Number: HT-2819 ......
Product Details
Name: QB/T 2819-200 Sponge Indentation Fatigue Testing Equipment,Sponge Indentation Fatigue Testing Machine For Lab Standard: QB/T 2819-2006
Control Method: Touch Screen Control Induction Method: Precision Load Cell
Power Source: Servo Motor Transmission Mode: Precision Ball Screw

QB/T 2819-200 Sponge Indentation Fatigue Testing Equipment,Sponge Indentation Fatigue Testing Machine For Lab

Overview:

The sponge foam fatigue testing machine is mainly used for the reciprocating compression test of foam polymer materials, and the residual deformation rate is measured. From this, we can know the dynamic fatigue characteristics of materials.

Specification:

The number of test cycles is 80,000 times, but the test cycle number of this instrument can reach 100,000 times, and it is equipped with an automatic adjustment device. Other specifications meet the QB/T 2819-2006 standard
Control methodtouch screen control
Induction methodprecision load cell
Test force value range0—200kg can be set
Unit switchingKg, N, LB
Upper pressure plate:diameter 200mm, bottom rounded corner R1mm
Lower platform420×420mm, vent diameter 6mm, spacing 20mm
Maximum stroke200mm
Testing speed100±20mm/min
Range of test times1-999999 times, configurable
Power sourceservo motor
Transmission modeprecision ball screw
Power supplysingle-phase 220V, 50Hz/60Hz
Equipment weight

about 160kg

QB/T 2819-200 Sponge Indentation Fatigue Testing Equipment,Sponge Indentation Fatigue Testing Machine For Lab 0

Similar Product Recommend