1. Always clean up the oil and dust on the motor. If the application environment is harsh and the dust is relatively large, it is recommended that we clean the motor every few days to ensure the smooth cleaning and working of the motor.
2. Check the coupling of the transmission part of the equipment, and see if there are some flaws or damages in the coupling. Damaged couplings will pose a lot of dangers, and timely replacement can effectively avoid many accidents.
3. Check the position of the fixed screws to see if they are loose. If it is loose, stop working, and the staff should tighten it in time to avoid accidents.
4. Bearings should be sorted in time after a period of use, replace lubricating grease and mechanical oil, and the frequency of sorting and replacement should be decided according to the working time of the motor. The general replacement frequency is that the motor should be sorted and replaced after half a year of work. Lubricating grease and machine oil.
5. The power cord of the wood pellet machine motor should not be too long or twisted. This will easily cause the motor to under-voltage or under-current, which will cause the motor to heat up or burn.
6. Regularly refuel the wood pellet machine motor or clean the bearing to restore the lubricity of the bearing.