1.Fish food extruder machine Application:

Raw materials of Fish food extruder machine:
1.Rice Dust: contain about 10-14% of protein and also contain vitamin B1, B2, B6 and small quantity of enzyme.
2.Mustard Cake: Mix maximum 40% of cake in the fish feed. But don't use dry cake more than 20%. Mustard cake contain 30-32% protein. It also contain a high rate of fat.

3.Wheat Chaff: contain fiber, control many types of fish diseases.
4.Maize: contain protein, carbohydrate, fat, vitamin A and E.
2.Fish food extruder machine Model:
Model | Power | Capacity | Feeding power | Cutting power |
FLD40 | 5.5kw | 30-40KG/H | 0.4KW | 0.4KW |
FLD50 | 11KW | 60-80KG/H | 0.4KW | 0.4KW |
FLD60 | 15KW | 120-150KG/H | 0.4KW | 0.4KW |
FLD70 | 18.5KW | 180-250KG/H | 0.4KW | 0.4KW |
FLD80 | 22KW | 300-350KG/H | 0.4KW | 0.6KW |
FLD90 | 37KW | 400-500KG/H | 1.1KW | 1.5KW |
FLD120 | 55KW | 500-600KG/H | 1.1KW | 1.5KW
|


2. Under most circumstances, rich in starch and protein while these materials are cooked into a sticky or gummy dough doughy. In the material into such a state in the process, the occurrence of a large number of material physical and chemical changes, mainly as a result of the material in the starch and protein changes.
3. When the material is extruded through the dryer chamber at the end of the orifice, so that the dough-like material is processed into a certain shape. Since the machine screw cavity huge role in pushing forward, leaving the enormous pressure formed in the material, when an instant these materials extruded from the die orifice to vaporize when a lot of water out of the material, thus greatly reducing the material in moisture content.
4. In the production of a low density product, dependent on the molecular composition of the material, as well as various conditions during the extrusion operation used, a large amount of material will swell.
5. In the production of high-density products, depending on the setting of the squeeze chamber diarrhea pressure port, as well as a variety of conditions during the extrusion operation used (including increasing moisture and reduce the extrusion temperature, etc.), the material does not occur a lot of swelling.
5.Final Pellet
Round Shape and other shapes
Diameter:0.9-15mm by replace the moulds

