The heat shrinkable tape heat shrinkable sleeve hot melt tape is a radiation cross linked sleeve designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations.
Product Details
Description
Heat Shrinkable Tape Heat Shrinkable Sleeve Hot Melt Tape
The heat shrinkable tape heat shrinkable sleeve hot melt tape is a radiation cross linked sleeve designed for corrosion protection of straight pipes, fittings, bends, elbows and other irregular configurations. When heated the backing layer shrinks and the adhesive flows and forms a reliable corrosion protection seal onto metal and adjacent coating surfaces.
The epoxy primer should applied to the prepared pipe surface then heat shrink sleeve is immediately wrapped around the joint over the wet epoxy primer.
Then center the closure patch on the overlap region.
Product Composition
The pipeline heat shrinkable sleeve heat shrinkable tape consists of three layers, primer layer, adhesive layer, film backing.
Primer: Liquid epoxy, solvent free two component.
Adhesive: High shear strength copolymer adhesive
Film backing: Radiation cross linked. High density polyethylene
Product Features
Excellent resistance to cathodic disbondment.
Long term corrosion protection.
Non hardening and non cracking.
Fast application and high performance.
Excellent chemical resistance
Excellent resistance to shear forces
Mechanical protection and moisture resistance.
Product Properties
Backing
Property
Typical Value
Test Method
Tensile Strength
20MPa(2900 psi)
ASTM D-638
Elongation at Break
550%
ASTM D-638
Specific Gravity
0.95
ASTM D-792
Hardness, Shore D
48
ASTM D-2240
Dielectric Strength
20 kv/mm
ASTM D-149
Water Absorption
0.05%
ASTM D-570
Shrink Force
240KPA(35 psi)
ASTM D-638
Volume Resistivity
1.0 x 1016 ohm.cm
ASTM D-257
Adhesive
Property
Typical Value
Test Method
Softening Point
85℃
ASTM E-28
Lap Shear
40 psi
ASTM D-1002
Heat shrinkable Sleeve
Property
Typical Value
Test Method
Peel to Steel
35N/cm
ASTM D-4541
Low Temperature Flexibility
-20℃
ASTM D-2671
Cathodic Disbondment
10mm radius
ASTM G8,30days,@23℃
Impact Resistance
Pass
DIN EN 12068
Indentation Resistance
Pass
DIN EN 12068
Dielectric Breakdown
35kv
ASTM D-149
Hot Tags: heat shrinkable tape heat shrinkable sleeve hot melt tape, China, manufacturers, suppliers, factory, customized, wholesale, forklift, Backhoe Loader Steering Column, skid steer loader cabin assembly, Excavator Seat, motor grader mechanical suspension seat, Construction Machinery Operator Electric Joystick