Welcome Customer !

Membership

Suzhou Ethonhuk Industrial Equipment Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 水泵

Xwboo>Products

Suzhou Ethonhuk Industrial Equipment Co., Ltd.Free·1YRS

  • E-mail

    info@sinoflo.com.cn

  • Phone

    0086-512-69572579

  • Address

    No.789, Xiangcheng Ave, Xiangcheng Dist, Suzhou 215131, Jiangsu, China

Contact Now

Oilfield Electric Submersible Pump

Model
Nature of the Manufacturer
Other
Product Category
Oilfield ESP
Place of Origin
City, Province
Overview
Oilfield Electric Submersible Pump
Product Details
Oilfield Electric Submersible Pump


Product Overview

The Electric Submersible Pump (ESP) unit is an artificial lift equipment. The submersible pump is a multi-stage centrifugal pump. Each stage consists of a rotating impeller and a fixed guide wheel. The submersible motor in the oil well transfers the mechanical energy to the submersible pump, and the impeller in the submersible pump rotates at a high speed to pump the crude oil from the well to the ground oil collection system.

With large capacity and high head, Sinoflo ESP can be widely used in oil wells such as high water cut wells, deep wells and directional wells. It is an important means for oil fields to achieve high and stable oil production.

 

Unit Assembly

l  Downhole unit: electric submersible pump, Gas Separator, protector, electric submersible motor and submersible cable;

l  Ground equipment: Variable/fixed frequency control panel, VFD, transformer;

l  Auxiliary equipment: stabilizer, temperature and pressure measuring device, check valve, oil release valve, junction box;

 

Working Condition

l  Ambient medium temperature: ≤150°C; Oil well temperature: 50~180°C. When the temperature is less than 90°C, for O-ring generally use nitrile rubber; for thrust washer on the impeller, the phenolic laminated board is generally used; While if the oil well is higher than 90 °C, for O-ring, generally use fluorine rubber (170°C) ), the thrust washer on the impeller generally use F4 polystyrene (150°C);

l  Gas content: The submersible pump is completely submerged into the well fluid when it is working in the well. Oil wells often contain different kinds of free gases, which will have a serious impact on the working performance of submersible pumps. When it reaches to a certain amount, it will cause air lock. Gas interference seriously affects the normal operation of submersible electric pumps, causing the motor load to change drastically or unloading, the oil separator can be installed under the submersible pump;

l  Sand content of well fluid: ≤0.05%;

l  Applicable medium: oil-water or mixture of oil & gas and water;

l  Well fluid viscosity: ≤7mm2/s;

 

338/387/400/540/538/562/675 series ESP

l  Computer-aided 3D design;

l  Floating, semi-floating and fully compressed structure and sand control and anti-corrosion design;

l  Precision casting impeller and casing with nickel-containing material;

l  Monel K-500 high strength shaft

l  Anti-wear gasket is made of CEF phenolic cloth material

l  The 338/381/400/540/538/562 series design has the same connection dimensions as the REDA product;

The 675 series is our self-designed product;

Note: we can also provide the following products:

540 series vertical water injection pump; various series of anti-corrosion ESP;

 

Advantages

l  Large capacity is the main advantage of this oil recovery ESP. However, current ESP submersible electric pumps are also frequently used in oil wells with relatively low oil production.

l  This ESP is capable of transferring water from the upper water layer in the well to the lower water injection layer.

l  Simple operation, convenient management;

l  Applicable in inclined wells, horizontal wells and offshore oil production.

l  Easy to install downhole pressure and temperature measure equipment, and the related measuring signal can be read on the ground transmitted by the cable.

l  In order to adapt to the decline or change of oil well production, the frequency conversion device can be used to adjust the power frequency to meet the requirement;

l  Longer maintenance period, and the oil production time of oil wells is relatively high.

 

Technical Parameter

Series

338

387/400

513/540

538

562

675

387/400

O.D (inch/mm)

3.38/86

3.87/98.3

4.0/101.6

5.13/130.2

5.4/138.3

5.38/136.7

5.62/142.7

6.75/171.5

3.87/98.3

4.0/101.6

Well Dia.(inch/mm)

4.5/114.3

5.5/139.7

6.625"/168.3

7.5/177.8

8.625/219

8.625/219

5.5/139.7

Min. Capacity

50Hz-(m3/d)   / 60Hz-(BPD)

34/257

21/158

152/1147

237/1789

1030/7800

600/4528

21/158

Max. Capacity

50Hz-(m3/d)   / 60Hz-(BPD)

424/3200

840/6339

1850/13962

1825/13773

2380/18000

3410/25735

840/6339


Similar Product Recommend