Welcome Customer !

Membership

Suzhou Ethonhuk Industrial Equipment Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 水泵

Xwboo>Products

Suzhou Ethonhuk Industrial Equipment Co., Ltd.Free·1YRS

  • E-mail

    info@sinoflo.com.cn

  • Phone

    0086-512-69572579

  • Address

    No.789, Xiangcheng Ave, Xiangcheng Dist, Suzhou 215131, Jiangsu, China

Contact Now

Stainless Steel Borehole Pump

Model
Nature of the Manufacturer
Other
Product Category
Deep Well Pump
Place of Origin
City, Province
Overview
Stainless Steel Borehole Pump
Product Details
Stainless Steel Borehole Pump


Product Overview

Sinoflo stainless steel high-head deep well pump is made of special materials. The maximum high head can reach up to 2000 meters. Sinoflo has made a major breakthrough in the submersible pump industry technology, successfully solved the axial force problem affecting the development of submersible pump. The pump effectively solves the drawbacks of the traditional submersible pump, such as: low conversion efficiency, excessive power consumption, limited head, easy wear of bearings, frequent maintenance and other defects. It’s widely used in industrial and mining enterprises, farmland irrigation, community water supply and mountain, plateau water supply.

 

Structure Feature

l  Simple structure, convenient maintenance, small volume and light weight;

l  High efficiency, energy saving and long life;

l  The submersible pump has a unique balancing device that does not generate a downward axial force while the pump is running, thus extending the life of the motor;

l  Since the outer casing of the pump adopts cold drawn seamless steel pipe and the pump has no axial force, the head of the pump can be greatly improved, which can exceed 2000 meters. With small size, the pump application range is greatly increased;

l  The pump impeller is equipped with antifriction gasket made of high wear-resistant filling material to enhance the anti-wear performance of the pump and has a greater improvement of sand resistance than the ordinary submersible pump. Meanwhile, the pump impeller can be made of ductile iron, nickel alloy cast iron, copper alloy and other materials. The pump outlet connection mode is oil tubing joint and flange connection, which are available for different users.

 

Working Condition

l  Do not take long-term water sources with excessive sediment concentration (solid matter should not exceed 0.05% of total mass);

l  Water temperature: 2~40oC (If lift high temperature more than 40oC, hot water submersible motor is recommended);

l  The water yield in the water source should meet the requirements of the pump's capacity and continuous operation;

l  The pump inlet must be below 1 meter of the dynamic water level, and the motor base should be at least 3 meters away from the water bottom;

 

Technical Parameter

l  Maximum capacity: 60m3/h;

l  Maximum head: 2000m;

l  Power: 380V/460V, 50Hz/60Hz;


Similar Product Recommend