AWM3125 Glass Fiber Braid Silicone RubberIn sulation Wire

Conductor: bare copper, tinned copper                                    

Insulator: silicone rubber                                                            

Jacket: Fiber glass braiding with resin coating

Rated temp：200℃

Rated volt：600V

Test Voltage: 2000V. 1Min

Flame test: FT 2

Mechanical properties: 

Tensile strength: ≥3.45N/mm2

Elongation at break of insulation: ≥99% 

Min.Bending radius: 6×OD 

Standard: UL758, UL62, UL1581

Characteristics:

The use of silicone rubber, a high grade corona resistant insulation material, gives the cable excellent dielectric strength.

The braided synthetic yarn covering, which is applied directly over the insulation, gives the cable, because of its short braiding pitch and high compactness, an excellent mechnical protection by maintaining good flexibility.

The varnishing of the braiding results in good antifriction properties, high abrasion resistance and excellent chemical resistance against transformer oil, light fuel oil and most types of cleaning agents.

In the event of fire, no corrosive and toxic gases will be given off.

Hence, damage caused by fire can be kept to minimum.

Applicable for high temperature environment such as electron, electrical household appliance, lamps and lanterns, combustion equipment, wire harness etc.