JGGP（JGP）13.8KV

Construction:

Conductor: bare copper, tinned copper                                    

Insulator: silicone rubber                                                            

Jacket: Synthetic yarn braiding with

silicone resin coating

Rated temp：-60℃-180℃

Rated volt：13800V

Test Voltage: 31KV. 1Min

Flame test: FT 2

Mechanical properties: 

Tensile strength: ≥7N/mm2

Elongation at break of insulation: ≥250% 

Min.Bending radius: 6×OD 

Standard: UL758, UL62, UL1581

Characteristics:

Silicone rubber wire & cable have very good flexibility and good performance of resistance to high temperature, range from -55℃ up to 180℃.

The use of silicone rubber, a high grade corona resistant insulation material, gives the cable excellent dielectric strength.

The braided synthetic yarn covering, which is applied directly over the insulation, gives the cable, because of its short braiding pitch and high compactness, an excellent mechanical protection by maintaining good flexibility.

The varnishing of the braiding results in good antifriction properties, high abrasion resistance and excellent chemical resistance against transformer oil, light fuel oil and most types of cleaning agents.

In the event of fire, no corrosive and toxic gases will be given off.

Hence, damage caused by fire can be kept to minimum.

Application:

Thanks to the above characters, silicone wire & cable are used where high flexibility is required and high temperatuer conditions. It is therefore a suitable connection cable for home electric appliance, high voltage machines like transformers, generators, motors, traction machines.