-
E-mail
amy@safeinvert.com
- Phone
-
Address
#22 Liujiang Avenue, Liushi Town, Yueqing City, Zhejiang Province, China
Membership
Help
Zhejiang Saikong Electrical Technology Co., Ltd.Free·1YRS
amy@safeinvert.com
#22 Liujiang Avenue, Liushi Town, Yueqing City, Zhejiang Province, China
How to realize the synchronous control of two motors through the inverter?
Two inverters do active control and control two motors separately. The accuracy must be considered, and the ultimate goal of the control must be considered. The common one is speed and torque synchronization. Of course, the slave runs with the master. If the control goal is speed, when the gear load becomes heavier, the speed of the master machine will slow down, and of course the slave machine will automatically slow down, so that the master-slave speed will be consistent and meet the control goal.
Speed synchronization master-slave control
The frequency converter controls the motor and is used in most occasions. The ultimate goal is to stabilize the motor's speed at a certain value. Speed synchronization master-slave control is to allow the slave to track the speed of the master. When the speed of the master changes, the speed of the slave also changes automatically to reach the same speed as the master or reach a certain speed ratio of the master speed.
For occasions where the accuracy is not high and the master and slave motors are the same, one inverter is often used to drive two motors. The essence is to give the two inverters the same frequency voltage, and the two motors will basically maintain the same speed, but because there is no torque Feedback, if a motor encounters a relatively large resistance in an instant, it will cause the speed of this motor to drop, while the other motor continues to maintain the original speed, and the possibility of synchronization will be lost instantaneously.
In the case of low accuracy requirements, if the power specifications of the two motors are not the same, two inverters can be used to control the speed of the two motors respectively. Many inverters have the current frequency (or speed) output analog port, which can be Let this port of the master output an analog quantity such as 0-10VDC to the slave inverter as the speed reference of the slave inverter. If the inverter does not have this kind of analog output port, you can also use two potentiometers. When the master potentiometer changes, the slave potentiometer will also change according to a certain ratio, so that the master and the slave will follow a certain ratio. Perform speed synchronization.
These speed synchronization methods above are just a simple ratio tracking, which is open loop. As long as the load changes, the synchronization speed will be uncoordinated. To make a high-precision speed synchronization system, you first need to use a vector inverter, and add an encoder to the motor for current speed feedback, so that when the load changes, the inverter can correct it in time and keep the speed of the machine stable, which is not easy Stalled.
Under the premise that the motor has encoder feedback, if you want to increase the speed synchronization further, you can design another PI or fuzzy regulator. The input set value of this regulator uses the actual speed of the host inverter, and the feedback value uses The actual speed of the motor. In this way, when the actual speed of the slave machine deviates from the actual speed of the host machine, the regulator will output the value to adjust the speed of the slave machine, which truly achieves the high-precision synchronization of the master-slave system. Of course, the adjustment of PI or fuzzy control parameters is a bit troublesome. On-site adjustment.
Torque synchronization master-slave control
Two motors use two inverters for torque synchronization. The purpose is to make them work together for a certain load. This kind of synchronization sometimes requires the two motors to have opposite forces, so as to stretch a certain load. Sometimes it is necessary for the two motors to have the same output, so that they can push the load together, depending on the needs of the equipment. In these scenarios, some tension sensors are generally used to achieve a closed loop.
If it is a rigid connection between two motors, it seems that the speed should be consistent on the surface, but in fact it is not. At this time, it is also necessary to use torque synchronization to meet the requirements. That is, when the master is running, it is in speed mode, and the slave can be set to torque mode. For the motor, the control torque is the control current, so the actual current of the master can be used as the given current of the slave. Generally, the slave The speed of the machine is saturated, so that the actual current of the master machine is used as the maximum current limit of the slave machine, so as to avoid damage caused by speeding.
Similarly, PI or fuzzy regulator can also be used to control the current of the master and slave motors. When there is a deviation between the two, a current limit value will be output to adjust the actual current of the slave, so that the master and slave motors can be accurately synchronized. Thereby ensuring the torque synchronization of the active motor.
For the torque synchronous master-slave control inverter, the vector control type must be selected. The ordinary V/F control type cannot realize this function.