Pneumatic globe valves are generally fully open and fully closed.Considering the flow characteristics, globe valves and ball valves are characterized by short opening and closing stroke, fast speed, reliable sealing, and small torque of static pneumatic globe valves.So both kinds of products are used.But from the consideration of reliability, the mainstream product is still pneumatic globe valve.
Pneumatic globe valve cylinder is a shaped product, according to the mode of action can be divided into single action and double action two.The single-acting product is equipped with a reset cylinder spring and has an automatic reset function for gas loss, that is, the cylinder piston (or the diaphragm) drives the cylinder push rod to return to the initial position of the cylinder (the original position of the stroke) under the action of the spring when air loss occurs.The double acting cylinder has no return spring, the push rod advance and retreat must depend on the change of the air source of the cylinder inlet and outlet position.As the air source enters the upper chamber of the piston, the putter moves downward.As the air source enters the lower chamber of the piston, the putter moves upwards.Because there is no return spring, the double-acting cylinder has greater thrust than the single-acting cylinder with the same diameter, but does not have automatic reset function.Obviously different intake positions cause the putter to move in different directions.When the intake air is in the back cavity of the putter, the intake air makes the putter move forward. This is called the positive acting cylinder.On the contrary, when the intake air is on the same side of the push rod, the intake air makes the push rod recede. This way is called the reaction cylinder.Pneumatic globe valves because of the general need for gas loss protection function, usually choose a single acting cylinder.
Pneumatic globe valve body structure has straight through, straight flow and right-angle type.Straight-through is the most common structure, but it has the greatest fluid resistance.Direct flow fluid resistance is small, mostly used for fluid containing solid particles or high viscosity.Right-angle valve body using forging, suitable for smaller through, higher pressure of the globe valve.