USUN Model:AB10 10:1 pressure ratio high pressure air booster pump for cylinder leakage testing

Online Consult Contact Information

Overview

Product Details

Usun Model :AB10 10:1 pressure ratio high pressure air gas booster pump for cylinder leakage testing

Our USUN Air Amplifiers are pneumatically driven reciprocating piston/plunger pumps

and are ratio devices that utilise low pressure compressed air driving a larger diameter

piston (area x pressure), which is linearly connected to a smaller air piston.

1. AIR DRIVE PRESSURE BOOSTER

Air Pressure Boosters involve AB Series are used for boosting compressed normal shop air to higher pressures

They feature rugged construction.They are capable of double or fourfould of the compressed air.Provided for

pressures up to 80 bar .Ideal for use with machines or applications where higher pressure is required than the

compressed airline system available

Key features

1 ) stainless steel wetted materials of construction

2) Specialised construction materials available

3) PTFE pressure seals as standard

4) Separation between gas & pneumatic seals

5) No airline lubrication required

6) 120mm stroke reduces cycle rate & increases life

7) Suitable for most hazardous areas

8) Available as a complete packaged system

Main technical data

ab04ab07ab10ab15

Typical technical data for air driven air pressure booster pump

Main technical parameter
Model	Pressure ratio	Minimum inlet pressure PI(Bar)	Maximum Outlet pressure PO(Bar)	Outlet pressure formula PO	Inlet port size	Outlet porst size	Maximum Flow rate L/min= 7 Bar
AB02	2:01	1	16	2PA	PT3/8''	PT3/8''	513@PI=7
AB03	3:01	1	24	3PA	PT3/8''	PT3/8''	420@PI=7
4AB02	2:01	1	16	2PA	PT1/2''	PT1/2''	1450@PI=7
AB04	4:01	1.7	32	4PA	PT3/8''	PT3/8''	382@PI=7
AB05T	5:01	1.7	41.5	5PA+PI	PT1/2'	PT1/2''	710@pi=7
AB07	7:01	3.4	56	7PA	PT3/8''	PT3/8''	274@PI=7
AB08T	8:01	3.4	67.4	8PA+ PI	PT3/8''	PT3/8''	482@pi=7
AB10	10:01	3.4	80	10PA	PT3/8''	PT3/8'	225@PI=7
AB15	15:01	8.1	120	15PA	PT3/8''	PT3/8'	185@PI=7

Remark 1) Maxium outlet pressure are at an air driven pressure of 8 bar or 116 PSI ,for long life using

of such pump ,we suggest that air driven pressure should be not more than 8 Bar .

Typical application of such air driven air pressure booster pump

AIR AMPLIFIER PRODUCT COMPARISON TABLE

To select the right amplifier for your application you will need to

know the following parameters:

The available air pressure & volume

The desired pressure and flow rate

If you are unsure of these parameters but know a competitor brand’s model number,

use the air amplifier product comparison table below to help you choose the

right USUNp air amplifier.