Welcome Customer !

Membership

Dong Guan Usun Fluid Control Equipment Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 电泵

Xwboo>Products

Dong Guan Usun Fluid Control Equipment Co., Ltd.Free·1YRS

  • E-mail

    Sunny@u-sun.cn

  • Phone

    008676933388195

  • Address

    ChuangYing Industrial Park , LiaoBu town ,DongGuan city ,GuangDong Province ,China

Contact Now

USUN Model:4AB02-B 8-16 Bar output 160 MM driven high flow air driven pressure amplifiers with 20...

Model
Nature of the Manufacturer
Other
Product Category
Model :AB Air amplifiers
Place of Origin
City, Province
Overview
USUN Model:4AB02-B 8-16 Bar output 160 MM driven high flow air driven pressure amplifiers with 20 L tank and High pressure regulator
Product Details

Usun Model :4AB02-B  2:1 ratio 160mm driven High flow air driven air pressure amplifier 


with 20 L tank air tank and air regulator and outlet high pressure regulator  .


4AB02--B


General Information for Air driven air pressure amplifier  


 Our USUN Air Amplifiers are pneumatically driven reciprocating piston/plunger pumps

 

and are ratio devices  that utilise low pressure compressed air driving a larger diameter


 piston (area x pressure), which is linearly connected to a smaller air piston.


 1.  AIR DRIVE SECTION

 

The air drive section consists of a light weight piston complete with seals running inside an

 

aluminum barrel. The diameter of the air piston is 100mm. When compressed air is supplied to

 

the pump the air pushes the air piston down on a compression stroke

 

 Under the control of pilot pins (poppet valve) triggered at each end of the stroke


Key features

1 )  stainless steel wetted materials of construction

2)  Specialised construction materials available

3) PTFE pressure seals as standard

4) Separation between gas & pneumatic seals

5) No airline lubrication required

6) 120mm stroke reduces cycle rate & increases life

7) Suitable for most hazardous areas

8) Available as a complete packaged system 

 

Main technical data  


Drawing -2


Typical technical data for air driven air pressure amplifier 


Main technical parameter

Model

Pressure ratio

Minimum inlet pressure PI(Bar)

Maximum Outlet pressure PO(Bar)

Outlet pressure formula PO

Inlet port size

Outlet porst size

Maximum Flow rate L/min= 7 Bar

AB02

2:01

1

16

2PA

PT3/8''

PT3/8''

513@PI=7

AB03

3:01

1

24

3PA

PT3/8''

PT3/8''

420@PI=7

4AB02

2:01

1

16

2PA

PT1/2''

PT1/2''

1450@PI=7

AB04

4:01

1.7

32

4PA

PT3/8''

PT3/8''

382@PI=7

AB05T

5:01

1.7

41.5

5PA+PI

PT1/2'

PT1/2''

710@pi=7

AB07

7:01

3.4

56

7PA

PT3/8''

PT3/8''

274@PI=7

AB08T

8:01

3.4

67.4

8PA+ PI

PT3/8''

PT3/8''

482@pi=7

AB10

10:01

3.4

80

10PA

PT3/8''

PT3/8'

225@PI=7

AB15

15:01

8.1

120

15PA

PT3/8''

PT3/8'

185@PI=7


Remark 1) Maxium outlet pressure are at an air driven pressure of 8 bar or 116 PSI ,for long life using


of such pump ,we suggest that air driven pressure should be not more than 8 Bar
  .


Typical application of such air driven air pressure amplifier  


Application-2

Pump comparison with other Brand 


To select the right amplifier for your application you will need to know the 


following parameters:


1) The available air pressure & volume


2) The desired pressure and flow rate


If you are unsure of these parameters but know a competitor brand’s model number

 

use the air amplifier product comparison table below to help you  choose the right USUN Pump air amplifier.


USUN

Haskel

Maximator

Maxpro

HII

AB04


SPLV3

DLA5-1


AB07

AA-8




AB10





AB15

AA-15


DLA15-1


AB05T

AAD-5

GPLV5

DLA5

5A-DS-5

 


Similar Product Recommend