POOCCA PA-ALP2 gear pumps are a series of single aluminum hydraulic pumps that offer high-performance. Available in SAE A, SAE AA, or SAE B in single rotation or reversible. For use in industrial and applications..
Product Details
External gear pump ALP2
Production Introduction
POOCCA PA-ALP2 gear pumps are a series of single aluminum hydraulic pumps that offer high-performance. Available in SAE A, SAE AA, or SAE B in single rotation or reversible. For use in industrial and applications..
The characteristics of POOCCA gear pumps are: good hydraulic function, mechanical and volumetric efficiency, low noise level, not only that, but also compact size and low weight/power ratio.
The following can be provided: · Pressure limiting valve · High pressure pump · Two-way pump · Hydraulic motor-one-way and two-way · Diverter · Multi-stage pump with standard components
The following special applications can be provided:
V- high temperature fluid application,
The temperature range is between -10°C and +120°C, with a maximum pressure valve not exceeding +80°C, and the maximum operating pressure must not be exceeded.
Only available for certain series of products, the maximum pressure is 20bar and the temperature does not exceed +150°C (please specify the actual parameters when ordering)
TR- applies to the maximum inlet pressure of 6bar.
ST- is suitable for high and low temperature fluid applications, ranging from -40°C to +120°C, only certain series are available.
W- Suitable for glycol water and low lubrication power applications. It is recommended that the speed does not exceed 1000 rpm and the pressure does not exceed 100 bar, only certain series are available.
VW- is suitable for the application of phosphorus-containing ester media. It is recommended that the speed does not exceed 1000 rpm and the pressure does not exceed 100 bar. Only certain series are available.
Application Introduction
Extemal gear pumps are the most popular pumps used in modemn nydraulic systems.They feature versatity,strength and long useful lfe.Their simpleconstruction ensures limited purchase costs and servicing.
Thanks to these basic concepts, fogether with ever-improving product design and features, research -based on many years of experience - acuracy in materialselection, producion processfollowed in great detail and tests on mass-produced parts,our gear pumps have reached top qualiy standards.For ths reason,ourproducts can work under heavy operating conditions and fransmit high hydraulic power.Furthemore, Marzocchi pumps feature good hydrauic, mechanical andvolumetric efficiency, low noise level and, last but not least, compact dimensions and low weight/power ratio.
A gear pump usualy consists of a gear pair supported by two aluminum bushes for groups 0.25,0.5and 1P,or bushes wih pain bearings coated wih antifrictonmaterialfo groups 1,2,3 and 4, a body, a securing fange and a cover. Shaftof the drving gear projecting beyond the fiange mounts a twin-ip seal ing (theinner lia being a seal, the outer lia being a dust seal) for groups 0.25,0.5 and 1P, or two opposed single-lpseal ings(the outer being a dust seal) or groups 1,23 and 4.
Pump body ,fiange and cover are made of special hiresistant auminum ll ys for minimized deformation even when subject to nigh pressure,be t continuous ointemitent or peak pressure.The body is profiled by means of extusion, whereas fiange and cover are obtained by means of die-casting (even gravity die-casting for some models).
Gears are made of special steel.Their manufacturing process includes case-hadening and quench hardening.Then gears are ground and fine finished so tohave a high degree of surface finishing.Proper tooth profle design and geometric proportions ensure low puisation levels and low noise levels duing pumpoperation.Bushes are made of special low-friction and h-resistant aluminum alloy and manufactured from die-casting.
Special compensation zones onto fange and cover insulated by special seals with anti-exrusion rings llw .illy ree axial and radial movemento the bushe,which is proportional to pump operating pressure. n this way intemal dripping is dramalcally reduced,thus ensuring very good pump pefomance (both in temsof volume and in general) and proper lubrication of pump moving parts.
FAQ
Question: If the order is large, is there any spare parts service?
Answer: Of course, we will evaluate the quantity of spare parts based on your order.
Question: How does your company do in terms of quality control?
Answer: Our QC team will conduct strict quality control inspections before shipment to ensure the best quality.
Question: Can your products meet the national association standards?
Answer: Of course, we can provide the corresponding compliance test report
Question: How to guarantee after-sales service? Answer: We provide a 12-month product warranty. If the item is found to be defective during the warranty period, you can contact us immediately, and we will help you solve the problem as soon as possible.
Question: Can the factory support the online video audit factory?
Answer: Yes, very welcome!
Question: Can I visit your company and factory in China?
Answer: Of course. We are very happy to receive you in shenzhen and show you our workplace.
If you need more information about our products, please feel free to contact us. You can also visit our company.
Question: How much is the shipping cost?
Answer: When we send you freight, we always provide the cheapest and safest express by comparison.