POOCCA gear pumps are available (double pumps, three pumps, four-stage pumps) with different configurations. If the multi-pump you need does not appear in our multi-pump, please contact us. For more information, see.
Product Details
Double gear pump AZP*
Production Introduction
POOCCA gear pumps are available (double pumps, three pumps, four-stage pumps) with different configurations. If the multi-pump you need does not appear in our multi-pump, please contact us. For more information, see.
0.7...3 (absolute), with tandem pumps: pe ( p2) = max. 0.5 > pe ( p1)
Max. continuous pressure p1
bar
250*
210
180
210
Max. intermittent pressure p2
280*
230
210
230
Max. peak pressure p3
300
250
230
250
Min. rotational speed at bar 12 mm2/s
< 100
rpm
600
500
500
500
500
500
500
500
500
100...180
1200
1200
1000
1000
800
800
800
800
800
180... p2
1400
1400
1400
1200
1000
1000
1000
1000
1000
25 mm2/s p2
700
700
700
600
500
500
500
500
500
Max. rotational speed at p2
4000
3500
3000
3000
3000
2500
3000
AZPF-2x
Displacement
V
cm3/rev
4
5.5
8
11
14
16
19
22.5
25
Suction pressure pe
bar
0.7...3 (absolute), with tandem pumps: pe ( p2) = max. 0.5 > pe ( p1)
Max. continuous pressure p1
250
220
195
Max. intermittent pressure p2
280
250
225
Max. peak pressure p3
300
290
265
Min. rotational speed
< 100
rpm
600
500
500
500
500
500
500
500
500
at bar 12 mm2/s
100...180
1200
1200
1000
1000
800
800
800
800
800
180... p2
1400
1400
1400
1200
1000
1000
1000
1000
1000
25 mm2/s p2
700
700
700
600
500
500
500
500
500
Max. rotational speed at p2
4000
3500
3000
3000
3500
3500
3000
* Pumps with threaded ports may experience reduced life if used continuously above 210 bar.
PA-AZPN(BG2.5)
AZPN-1x
Displacement
V
cm3/rev
20
22.5
25
28
32
36
Suction pressure pe
0.7...3 (absolute), with tandem pumps pe (p2) = max. 0.5 pe (p1)
Max. continuous pressure p1
bar
230
230
230
210
180
160
Max. intermittent pressure p2
250
250
250
230
200
180
Max. peak pressure p3
270
270
270
250
220
200
Min. rotational speed < 100
rpm
500
500
500
500
500
500
at bar
12 mm2/s
100...180
600
600
600
600
600
600
180... p2
800
800
800
800
800
800
25 mm2/s p2
500
500
500
400
400
400
Max. rotational speed at p2
3000
3000
3000
2800
2800
2800
AZPN-2x (only upon request)
Displacement
V
cm3/rev
20
22.5
25
28
32
36
Suction pressure pe
bar
0.7...3 (absolute), with tandem pumps pe (p2) = max. 0.5 pe (p1)
Max. continuous pressure p1
250
250
250
230
210
180
Max. intermittent pressure p2
280
280
280
260
240
210
Max. peak pressure p3
300
300
300
280
260
230
Min. rotational speed < 100
rpm
500
500
500
500
500
500
at bar
12 mm2/s
100...180
600
600
600
600
600
600
180... p2
800
800
800
800
800
800
25 mm2/s p2
500
500
500
500
500
500
Max. rotational speed at p2
3000
3000
3000
2800
2800
2800
PA-AZPG(BG3)
Displacement
V
cm3/rev
22.5
25
28
32
36
40
45
50
56
63
70
80
100
Suction pressure
pe
0.7...3 (absolute), with tandem pumps: pe (p2) = max. 0.5 > pe (p1)
max. continuous pressure
p1
bar
250
220
195
170
120
90
80
max. intermittent pressure
p2
280
250
225
200
150
120
100
max. peak pressure
p3
300
280
250
230
180
150
120
min. rpm at bar
12 mm2/s
< 100
rpm
500
100...180
1200
1000
800
180... p2
1400
1200
1000
25 mm2/s
P2
600
500
600
800
max. rpm at
p2
3000
2800
2600
2300
2200
2000
1700
Detail Image
High-speed and high-performance gear pumps produced by POOCCA Hydraulics (BG0.5, BG1, BG1.5, BG2, BG2.5, BG3);
Double pumps, triple pumps and four-stage pumps can be combined at will.
Example: group 2 + group1(PA-AZPFB); group 2 + group2(PA-AZPFF); group 2.5 + group2(PA-AZPNF); group 3 + group2(PA-AZPGF) group 3 + group3(PA-AZPGG) And other combinations.
Note: The primary pump of the combined pump must be larger than the secondary pump or the same grade.
POOCCA hydraulic gear pump features: nominal pressure 250 bar; use of reinforced bearings, more suitable for heavy-duty applications; through the reinforced design of the shaft and the pump cover material, the service life is extended.
Gear pumps provide a constant fluid flow. Gear pumps are used in construction equipment, agricultural machinery, tractors etc. Our gear pumps are compatible with common manufacturers.
For further information please see
Gear Pump Introduction
The gear pump is a rotary pump that relies on the change and movement of the working volume formed between the pump cylinder and the meshing gear to transport liquid or pressurize it. Two enclosed spaces are composed of two gears, a pump body and front and rear covers. When the gears rotate, the volume of the space on the side of the gear disengagement increases from small to form a vacuum to suck liquid in, and the volume of the space on the gear mesh side increases from large Small, and squeeze the liquid into the pipeline. The suction cavity and the discharge cavity are separated by the meshing line of the two gears. The pressure at the outlet of the gear pump depends entirely on the resistance at the outlet of the pump.
Features And Applications Of Gear Pumps
Simple structure, convenient manufacturing, low price, small size, light weight, good self-priming, insensitive to oil pollution, reliable work; its main disadvantages are large flow and pressure pulsation, large noise, and non-adjustable displacement. Gear pumps are widely used in mining equipment, metallurgical equipment, construction machinery, engineering machinery, agricultural and forestry machinery and other industries.
According to the different meshing forms of gear pumps, there are two types of external meshing and internal meshing.
FAQ
Where is your factory?
In Shenzhen City, Guangdong Province, China.
When was your factory established?
Since 2007
What is your main market?
Europe, North America, South America, Australia, Middle East, etc.
Are you a trading company or a manufacturer?
We have our own professional sales team and processing workshop, which can produce and sell by ourselves, and the price and after-sales are guaranteed.
What type of product is yours?
We are engaged in the production and manufacture of products for the hydraulic industry.