PAA10VG variable axial piston pump of swashplate design for hydrostatic closed circuit transmission. Flow is proportional to drive speed and displacement and is infinitely variable.
Product Details
Variable Displacement Piston Pump A10VG
PAA10VG variable axial piston pump of swashplate design for hydrostatic closed circuit transmission. Flow is proportional to drive speed and displacement and is infinitely variable.
Name
A10VG Series Axial piston variable pump
Series
Series 10
Sizes
18, 28, 45, 63.
Nominal Pressure
300 bar
Maximum Pressure
400 bar
Operation Mode
Closed Circuit
Size
18
28
45
63
Displacement
variable pump
Vg max
cm3
18
28
46
63
boost pump (at p = 20 bar)
Vg Sp
cm3
5.5
6.1
8.6
14.9
Speed
maximum at Vg max
nmax continuous
rpm
4000
3900
3300
3000
limited maximum 1)
nmax limited
rpm
4850
4200
3550
3250
intermittent maximum 2)
nmax interm.
rpm
5200
4500
3800
3500
minimum
nmin
rpm
500
500
500
500
Flow
at nmax continuous and Vg max
qv max
l/min
72
109
152
189
Power 3)
at nmax continuous and Vg max Δp = 300 bar
Pmax
kW
36
54.6
75.9
94.5
Torque 3) at Vg max
Δp = 300 bar Tmax
Nm
86
134
220
301
Δp = 100 bar T
Nm
28.6
44.6
73.2
100.3
Rotary stiffness
Shaft end S
c
Nm/rad
20284
32143
53404
78370
Shaft end T
c
Nm/rad
–
–
73804
92368
Moment of inertia for rotary group
JRG
kgm2
0.00093
0.0017
0.0033
0.0056
Angular acceleration, max. 4)
a
rad/s2
6800
5500
4000
3300
Filling capacity
V
L
0.45
0.64
0.75
1.1
Mass approx. (without through drive)
m
kg
14(18) 5)
25
27
39
Output flow increases with the swivel angle of the swashplate from 0 to its maximum value. Flow direction changes smoothly when the swashplate is moved through the neutral position.
A wide range of highly adaptable control devices is available for different control and regulating functions. The pump is equipped
with two pressure-relief valves on the high pressure ports to protect the hdrostaic transmission from overload.
The high pressure relief valves also function as boost valves. The integrated boost pump acts as a feed and control oil pump. The maximum boost pressure is limited by a built in boost pressure relief valve.
FEATURE
1. POOCCA A10VG series variable axial piston adopts swash plate design and is used for hydrostatic transmission in closed circuit.
2. The flow is proportional to the driving speed and displacement, which can achieve stepless adjustment.
3. The output flow increases as the swash plate swing angle increases from zero to the maximum value.
4. The swash plate swings over the middle position, which can smoothly change the direction of liquid flow
5. The control block with high versatility provides various control and adjustment functions.
6. Each high pressure side is equipped with two relief valves to prevent overload of hydrostatic transmission
7. The relief valve also functions as an oil filling valve.
8. Built-in charge pump is used as fuel supply and control pump
9. The maximum charging pressure is limited by the built-in charging relief valve.
POOCCA A10VG series Piston /Plunger pump installation instructions:
1. During the test run and operation, the axial plunger element must be filled with hydraulic oil and exhausted. After a long period of shutdown, it is also necessary to perform oil injection and exhaust operations, thinking that the system may leak oil through the hydraulic pipeline.
2. The leaked oil inside the casing must be discharged to the oil tank through the highest oil drain port of the casing, and the minimum oil suction pressure of the oil port must not be lower than the absolute pressure of 0.8bar. (0.5bar absolute pressure during cold start)
3. In all working conditions, the oil suction line and the casing oil drain line must enter the oil tank, and must be lower than the minimum oil level.