PAPVM Series pumps are open circuit, axial piston designs. A variety of control options allows the pumps to perform most efficiently in a specific application. Efficiency of the pump controls allows down-sizing of system cooling needs, saving up front cost in the machine. Alternatively, cooling capacity could be kept the same and the flow capability of the system increased, thus improving performance and customer satisfaction.
Product Details
Axial variable Piston Pump PVM
PAPVM Series pumps are open circuit, axial piston designs. A variety of control options allows the pumps to perform most efficiently in a specific application. Efficiency of the pump controls allows down-sizing of system cooling needs, saving up front cost in the machine. Alternatively, cooling capacity could be kept the same and the flow capability of the system increased, thus improving performance and customer satisfaction.
Name
PVM Series Variable Displacement Piston Pumps
Series
Series PVM
Sizes
018 020 045 050 057 063 074 081 098 106 131 141
Nominal Pressure
280 bar
Maximum Pressure
320 bar
Operation Mode
Open circuit
Model Series
Maximum
Maximum Flow at 280 bar (4000 psi)
Geometric
Maximum Pressure bar (psi)
l/min (USgpm) – Average measured flow rate
Displacement cm3/r (in3/r)
@1800
@1500
@1200
@1000
Nominal
Peak**
r/min
r/min
r/min
r/min
PVM018
18 (1.1)
315 (4568)
350 (5000)
31 (8.2)
26 (7)
21 (5.5)
17 (4.5)
PVM020
21,1 (1.29)
230 (3300)
280 (4000)
35 (9)
29 (8)
23 (6)
19 (5)
PVM045
45,1 (2.75)
315 (4568)
350 (5000)
76 (20)
65 (17)
49 (13)
42 (11)
PVM050
50,0 (3.05)
230 (3300)
280 (4000)
87 (23)
75 (20)
62 (16)
49 (13)
PVM057
57,4 (3.50)
315 (4568)
350 (5000)
102 (27)
85 (22.4)
66 (17.4)
54 (14.3)
PVM063
63,1 (3.85)
230 (3300)
280 (4000)
111 (29)
93 (24)
74 (19)
60 (16)
PVM074
73,7 (4.50)
315 (4568)
350 (5000)
127 (33.5)
106 (28)
86 (22.7)
70 (18.5)
PVM081
81,0 (4.94)
230 (3300)
280 (4000)
139 (37)
116 (31)
93 (25)
76 (20)
PVM098
98,3 (6.00)
315 (4568)
350 (5000)
170 (45)
141 (37)
112 (29.6)
92 (24.3)
PVM106
106,5 (6.50)
230 (3300)
280 (4000)
187 (49)
155 (41)
123 (32)
102 (27)
PVM131
131,1 (8.00)
315 (4568)
350 (5000)
215 (57)
178 (47)
141 (37)
118 (31)
PVM141
141,0 (8.60)
230 (3300)
280 (4000)
238 (63)
199 (53)
158 (42)
131 (35)
Maximum Operating Speed
Maximum Input Power at 280 bar (4000 psi) kw (hp)*@88% M.E.
Maximm Torque
at 280
bar
(4000
psi)
Approximate Weight
Series
r/min
@1800 r/min
@1500 r/min
@1200 r/min
@ 1000 r/min
Nm (lb-ft)
kg (lb)
PVM018
1800
16 (22)
13 (18)
11 (15)
9 (12)
84 (62)
15 (33)
PVM020
1800
14 (18)
11 (15)
9 (12)
8 (10)
73 (54)
15 (33)
PVM045
1800
41 (55)
34 (46)
27 (37)
23 (31)
221 (163)
24 (52)
PVM050
1800
35 (47)
30 (40)
28 (38)
23 (31)
190 (140)
24 (52)
PVM057
1800
52 (70)
44 (59)
36 (49)
29 (39)
272 (201)
36 (79)
PVM063
1800
42 (57)
36 (48)
29 (39)
24 (32)
228 (168)
36 (79)
PVM074
1800
63 (84)
52 (70)
42 (56)
35 (47)
334 (246)
45 (99)
PVM081
1800
56 (75)
46 (62)
35 (47)
28 (37)
286 (211)
45 (99)
PVM098
1800
88 (118)
72 (97)
58 (78)
48 (64)
464 (342)
55 (121)
PVM106
1800
72 (97)
60 (80)
48 (64)
40 (54)
383 (282)
55 (121)
PVM131
1800
113 (152)
94 (126)
75 (101)
63 (85)
596 (440)
66 (145)
PVM141
1800
94 (126)
79 (106)
63 (85)
53 (71)
497 (367)
66 (145)
The PVM Series also contains a strong proven rotating group allowing the pumps to handle pressures to 315 bar (4568 psi) continuous with less maintenance cost. High-load bearings and a stiff drive shaft help provide very long life at rated industrial conditions, reducing operating costs and extending operating life.
PVM Series pumps feature a saddle-type yoke with steel-backed polymer bearings. The stiff yoke reduces deflection and allows even loading of bearings, improving life. A single control piston reduces loading on the yoke, resulting in reduced pump size which allows installation in tighter locations.
PVM Series pumps operate at a level of quietness that exceeds the requirements of today’s demanding work conditions. The pumps feature a unique three-piece envelope (flange, housing and valve block) specifically created for low fluid-borne and structure-borne noise levels. Another pump feature – a bimetal timing plate – improves pump filling characteristics which, in turn, reduce fluid-borne noise and extend pump life.
PVM Series pumps reduce, or in some cases remove, the need for damping barriers between the noise source and the operator. This saves money on
the installed cost of the system while improving customer comfort.
An adjustable maximum stop provides a means of tuning flow to your system, while gauge ports allow monitoring of inlet and outlet conditions.
These standard features reduce system complexity and cost.
Mounting flanges are offered in SAE and ISO con- figurations, and ports are offered in SAE, ISO,and BSPP in both tube and flange versions. This provides a wide variety of installation opportunities for global machine design.
Side- or end-ported models are available to facilitate plumbing and help fit the pump to your machine space needs. Multiple drain ports allow many mounting orientations, reducing installed costs.
PVM Series pumps are capable of operating with many types of hydraulic fluids used in industrial systems. High-water-content and phosphate ester fluids can be accommodated, in addition to the typical petroleum based and synthetic fluids.