PA A3H Series Variable Displacement Piston Pumps High performance at maximum pressure 35MPa,Volumetric efficiency is over 95% and overall efficiency is more than 90% at 1800 r/min.
Product Details
High Pressure Variable Piston Pumps A3H
PA A3H Series Variable Displacement Piston Pumps High performance at maximum pressure 35MPa,Volumetric efficiency is over 95% and overall efficiency is more than 90% at 1800 r/min.
Name
A3H Series Variable Displacement Piston Pumps
Series
Series AR
Sizes
16 37 56 71 100 145 180
Nominal Pressure
280 bar
Maximum Pressure
350 bar
Operation Mode
Open Circuit
Model Numbers
Geometric Displacement cm3/rev (cu.in./rev)
Minimum Adj. Flow cm3/rev (cu.in./rev)
Operating Pressure MPa (PSI)
Shaft Speed Range r/min
Approx. Mass kg (lbs.)
Rated 1
Intermittent
Max. 2
Min.
Flange Mtg.
Foot Mtg.
A3H 16
16.3 (.995)
8.0 (.488)
28 (4060)
35 (5080)
3600
600
14.5 (32.0)
23.4 (51.6)
A3H 37
37.1 (2.26)
16.0 (.976)
2700
19.5 (43.0)
27.0 (59.5)
A3H 56
56.3 (3.44)
35.0 (2.14)
2500
25.7 (56.7)
33.2 (73.2)
A3H 71
70.7 (4.31)
45.0 (2.75)
2300
35.0 (77.2)
42.5 (93.7)
A3H100
100.5 (6.13)
63.0 (3.84)
2100
44.6 (98.3)
72.6 (160)
A3H145
145.2 (8.86)
95.0 (5.80)
1800
60.0 (132)
88.0 (194)
A3H180
180.7 (11.03)
125.0 (7.63)
70.4 (155)
98.4 (217)
1.Consult POOCCA when pump is used over rated pressure because there is a restriction on operating condition.
2.The maximum shaft speeds shown in the above table are at suction pressure 0 kPa (0 PSIG).
3.The table above shows specifications for using petroleum based oils.
Pumps (customized design) for special fluids are also available. Their operating pressure and maximum shaft speed however differ from the values in the table above depending on the fluid type.
Range of operating temperature and viscosities may differ from those of petroleum based oils due to their characteristics.
Model Number Designation
A3H16
-F
R
1
K
K
-10
Direction of Rotation
Pres. Adj. Range MPa (PSI)
Design Number
Series Number
Mounting
Control Type
Shaft Extension
A3H16 (16.3 cm3/rev)
F: Flange Mtg. L: Foot Mtg.
Viewed
from
Shaft
End R: Clockwise
(Norml)
01:
Pressure Compensator Type
K: 5 - 35 (725 - 5080)
K : Keyed Shaft
10
A3H37 (37.1 cm3/rev)
A3H56 (56.3 cm3/rev)
A3H71 (70.7 cm3/rev)
A3H100 (100.5 cm3/rev)
A3H145 (145.2 cm3/rev)
K : Keyed Shaft 44.45mm (1.75 IN.) Dia.
A3H180 (180.7 cm3/rev)
K1: Keyed Shaft 50.8mm (2.0 IN.) Dia.
Corresponding to a wide range of control types: in order to respond to a wide range of uses, the following three control types are available
Wide flow rate range: the 7 specifications of A3H16-A3H180 include the range of 16.3-180.7cm/rev.
Compact body: the ratio of output power/mass is large, it is a very compact design