The uniquely designed semi-cylindrical swash plate can maintain a stable oil output, reduce flow loss, and effectively use power according to the load cycle. Save energy, reduce power loss, and realize low-cost production. Smooth operation and low noise. Noise absorbing structure is adopted everywhere in the shoes, swash plate and oil distribution plate. Achieve low noise, especially through the semi-cylindrical swash plate, stable operating characteristics, low noise during operation.
Product Details
Axial variable Piston Pump PVS
The uniquely designed semi-cylindrical swash plate can maintain a stable oil output, reduce flow loss, and effectively use power according to the load cycle. Save energy, reduce power loss, and realize low-cost production. Smooth operation and low noise. Noise absorbing structure is adopted everywhere in the shoes, swash plate and oil distribution plate. Achieve low noise, especially through the semi-cylindrical swash plate, stable operating characteristics, low noise during operation.
Name
PA-PVS Series Variable Piston Pumps
Series
Series PVS
Sizes
08 16 22 35 45
Nominal Pressure
160 bar
Maximum Pressure
250 bar
Operation Mode
Open Circuit
Model No.
Volumecm3/rev
Discharge volume at no-load r/min
Pressure adjustment range MPa {kgf/cm2}
Permitted peak pressure MPa {kgf/cm2}
Rotating speed min-1
Mass kg
1000 min-1
1200 min-1
1500 min-1
1800 min-1
Min.
Max.
PVS-0B-8 * 0-30
8
8
9.6
12
14.4
2-
3.5
(20.4-35.7)
25 (255}
500
2000
7.7
1
2-
7
{20.4-71.4)
2
3-
14
{30.6-143)
3
3-
21
{30.6-214}
PVS-1B-16 * 0-(* }-12
16.5
16.5
19.8
24.7
29.7
2-
3.5
(20.4-35.7)
25 (255}
500
2000
10.5
1
2-
7
{20.4-71.4)
2
3-
14
{30.6-143)
3
3-
21
{30.6-214}
PVS-1B-22 * 0-{ * }-12
22
22
26.4
33
39.6
2-
3.5
(20.4-35.7)
25 (255}
500
2000
10.5
1
2-
7
{20.4-71.4)
2
3-
14
{30.6-143)
3
3-
21
{30.6-214}
PVS-2B-35 * 0-{ * }-12
35
35
42
52.5
63
2-
3.5
(20.4-35.7)
25 (255}
500
2000
21
1
2-
7
{20.4-71.4)
2
3-
14
{30.6-143)
3
3-
21
{30.6-214}
PVS-2B45 * 0-{ * }-12
45
45
54
67.5
81
2-
3.5
(20.4-35.7)
25 (255}
500
2000
21
1
2-
7
{20.4-71.4)
2
3-
14
{30.6-143)
3-( * }-20
3-
21
{30.6-214}
Control system
Symbol
Features
Pressure compensation type (manual)
N
Discharge amount automatically decreases to maintain the set pressure when discharge pressure reaches the value specified in the compensator.
Pressure compensation type (remote control)
P
Provides the same features as those for the manual system. Discharge pressure can be remotely controlled with an external pilot pressure.
2-pressure, 2-flow control type
NQ
Discharge pressure can change by two levels through the sequence valve embedded in the pump; therefore, one unit can perform conventional high/low pressure control and circuit energy can be saved.
Solenoid cutoff control type
RS
Solenoid valve for unloading is mounted on the pressure compensation type model, with the aim of minimizing energy loss when hydraulic pressure is not necessary.
2-pressure control type
WS
Two types of pressure compensation are obtained by turning on/off the solenoid valve embedded in the pump. The two kinds of output can be controlled while maintaining a constant actuator speed.
2-pressure, 2-flow control type with solenoid cutoff
RQS
Unload function is added to the 2-pressure, 2-flow control type, to enable unloading with the solenoid valve embedded in the pump when hydraulic pressure is not necessary.
2-cutoff control type
CS
Two kinds of pressure and flow characteristics can be obtained with the solenoid valve embedded in the pump and the discharge control mechanism.
1.Reliable rapid response mechanism
The pressure ratio control responds quickly. The simple structure improves reliability and eliminates unnecessary failures.
The lateral pressure balance swash plate optimizes the use of the discharged liquid
2.The horizontal pressure balance of the swash plate and the liquid in the swash plate and the swash plate cavity ensure a complete hydraulic balance combination. The smooth operation obtained helps to improve efficiency, reduce noise and extend life.
3.Simple adjustment mechanism with sharp cut-off characteristics
POOCCA's fluid adjustment mechanism works with a semicircular swash plate and has a sharp cut-off characteristic. It can be easily adjusted using the wrench tool.
4.Specially shaped liquid orifice reduces noise
Specially shaped liquid flow holes and tiny grooves are used in product development to reduce noise, so the operating sound is almost negligible.
5.Smooth swash plate enhances various operating characteristics
The swash plate is designed with a semicircular shape, which is an improvement of the traditional type. In addition to the innovative shape, the swash plate also uses special bearings to control lateral movement. Therefore, no matter how the load changes, power can still be obtained directly, so that smooth operation can be performed.