The displacement range of POOCCA PA-AZMG series external Gear motor is 22cc to 45cc, which can realize the combination of multiple pumps; achieve continuous high quality through mass production; cast pump casings can be customized according to customer requirements.
Product Details
External Gear motor AZMG
The displacement range of POOCCA PA-AZMG series external Gear motor is 22cc to 45cc, which can realize the combination of multiple pumps; achieve continuous high quality through mass production; cast pump casings can be customized according to customer requirements.
Name
PA-AZMG Series Hydraulic Gear motor
Series
Series G
Sizes
22.5 28 32 38 45
Nominal Pressure
230 bar
Maximum Pressure
250 bar
Operation Mode
External Gear motor
Size
022
028
032
038
045
Displacement
cm3/rev
22.5
28
32
38
45
max. continuous pressure p1
bar psi
180
180
180
180
180
2610
2610
2610
2610
2610
max. starting pressure p2
barpsi
210
210
210
210
180
3045
3045
3045
3045
2610
min. rotational speed
min–1
500
500
500
500
500
max. rotational speed p1
3000
3000
3000
2800
2600
POOCCA external Gear motor are available as standard Gear motor in the 4 series of B, F, N and G, as SILENCE Gear motor in the S, T and U series, and as the SILENCE PLUS version in the J series in which the displacements are graded by different gear widths. Further configuration variants are given by different flanges, shafts, valve arrangements and multiple pump combinations.
General
Construction
External Gear motor
Mounting
Flange or through-bolting with spigot
Line ports
Flange
Direction of rotation (looking on shaft)
Clockwise or counter-clockwise,
the pump may only be driven in the direction indicated
Installation position
Any
Load on shaft
Radial and axial forces after consulting
Ambient temperature range
–30 °C...+80 °C with NBR seals
or –20 °C...+110 °C with FKM seals
Hydraulic fluid
– Mineral oil compliant with DIN 51524, 1–3, however under higher load at least HLP compliant with DIN 51524 Part 2 recommended.
– Comply with RE 90220
– Further operating fluids possible after consultation
Viscosity
12...800 mm2/s permitted range 20...100 mm2/s recommended range
...2000 mm2/s range permitted for starting
Hydraulic fluid temperature range
max. +80 °C with NBR seals *) max. +110 °C with FKM seals **)
Filtration ***)
At least cleanliness level 20/18/15 compliant with ISO 4406 (1999)
Caution: Dimensions drawings always show clockwise-rotation pumps. On counterclockwise-rotation pumps the positions of the drive shaft and the suction and pressure ports are different.