Auto-sw110 Self-suction Pump

Scope of Application

• This series of pumps is designed to pump pure water,

• Can be used for domestic water supply and lifting system High pressure, auxiliary equipment, lift water in high and low pressure pipelines, garden irrigation system and Garden, greenhouse and greenhouse, automatic water supply.

• Small tanks using automatic control devices (control relays, pressure controllers).

• Equipment shall be installed at protected locations

• Not affected by atmosphere and moisture.

Pump Parts

• Pump body: Cast iron

• Impeller: Brass

• Motor shaft: Carbon steel/ Stainless steel

Motor

• Motor type: asynchronous, enclosed, air type Cooling system with built-in thermal protection

• Bearings: rolling (c&u)

• Stator winding: Copper

• Voltage: 110V-240V

• Frequency: 50Hz-60Hz

• Insulation class: B/F

• Protection grade: IP44/IP54

Service Conditions

• Maximum Ambient temperature: +40 ° C

• Maximum temperature of pumped liquid: +60 ° C

• Maximum pump chamber pressure: 8 bar

• Maximum suction height: up to 8M

• Only for clean water without abrasive (sand, clay, lime, etc.)

     Hydrogen index of water (PH): 6.5-8.5

1. Screw

2. Runner cover

3. Impeller

4. Screw

5. O-ring

6. Snap ring

7. Rolling mechanical seal

8. Fixed mechanical seal

9. Pump body

10. Drop guard

11. Screw

12. Pipe joint

13. Check valve

14. Gasket

15. Plug

16. Front cover

17. Bearing

18. Key

19. Rotor

20. Motor housing with stator

21. Wave-form washer

22. End cover

23. Tie-rod

24. Fan

25. Fan cover

26. Screw

27. Capacitor

28. Cable gland

29. Terminal box

30. Screw

31. Pressure control

32. Pressure tank

Technicla Data

Overall and Mounting Dimension

Structure Diagram

Packaging Diagram