Fully automatic surface coating system

Fully automatic surface coating system

Engineering process layout of fully automatic surface coating system:
1. Plastic spraying line: upper conveyor chain-spraying-drying (10min, 180℃-220℃)-cooling-lower part
2. Paint spraying line: upper conveyor chain-electrostatic dust removal-primer-leveling-top coat-leveling-drying (30min, 80℃)-cooling-bottom part
Paint spraying mainly includes oil shower spray booths and water curtain spray booths, which are widely used in the surface coating of bicycles, auto leaf springs, and large loaders.

Applicable to metal products Automatic Powder Coating Line is mainly used for metal coating, such as aluminum profiles, drum hardware, auto, bicycle parts, etc.It is often used to create a harder finish than traditional paint.The main difference between traditional liquid coatings and powder coatings is that powder coatings do not require solvents to keep the binder and filler in liquid suspension.The coating is usually applied electrostatically and then cured under heat, allowing it to flow and form a "skin".Small equipment investment, meet the requirements of powder spraying of low-output workpiece.

The small cyclone + filter element recovery device in powder spraying is a more advanced powder recovery device with faster color change. The key part of the powder spray system is recommended to use imported products, and the powder spray room, electric mechanical lift and other parts are all made in China.In addition to the surface Painting Production Line, the Surface Treatment Production Line products sold by our company also have industrial surface treatment equipment such as Metal Surface Powder Spraying Production Line, Cleaning And Oxidation Production Line.