XHF-44C Crumple Flex Tester
Fabric Crumple Flex Tester: A rectangular test piece of coated fabrics is sewn into a cylindrical shape. The cylinder of coated fabric is mounted between two discs and secured into position. One of the discs oscillated on its axis through approximately 90°. This induces twisting in the coated-fabric test piece cylinder. At the same time, the other disc reciprocates along its axis, thus causing the cylindrical test piece to compress along its length. This twisting and simultaneous compressing of the cylindrical test piece is continued for either a pre-set number of cycles or unitl damage of the test piece is apparent.
The equipment tests a tube of fabric by twisting it through 90° stretching alternately compressing the tube at the same time. After completion of the test the fabric is tested for resistance to penetration by water. Crumple flex Tester fitted with electronic pre-determined counter with automatic stop at a pre-determined number of cycles, also fitted with acrylic plastic interlock safety cover.
Design of transparent protective cover, when open the protective cover, automatic stop machine running.
With emergency stop switch for safety.
Samples are clamped, stable and durable, four-station linkage, greatly improving the test.
Efficiency.
Manual adjust disc position for easier installing specimen.
Circulating ventilation system to cool the instrument for long running time.
Test Stations | 4 Specimens |
Dimension of Unflanged Part of Each Disc | Φ63.5mm, width 15mm |
Rotation Speed | 200+/-10r/min (3.33Hz+/-0.17Hz) |
Rotation Angle | 90°+/-2° |
Compress Rate | 152+/-4r/min(2.53Hz+/-0.07Hz) |
Compress Stroke | 70mm |
Specimen Dimension | 220mm long ×190mm width |
Counter | 0-9999 Preset, Automatic stop when reach pre-determined number of cycles |
Dimension of apparatus | 550mm×400mm×400mm |
Weight | 68kgs |
Power | 220V+/-10%, 50Hz |