，-
E-mail
sales@xhinstruments.com
-
Phone
86-531-67880131
-
Address
No. 2 East Street Shengchan Road Jinan City Shandong China
Product Categories
- Pharmaceutical Testing Equipments
- Environmental Testing Equipments
- Leather and Footwear Testing Equipments
- Water Proof Tester
- Leather and Footwear Tester
- Flexing Tester
- Paint Testing Equipment
- Gloss and Color Tester
- Adhension and Bending Tester
- Paint Tester
- Viscosity Tester
- Film Application Tester
- Paper and Packaging Testing Equipment
- Pulp Tester
- Packaging Tester
- Board Tester
- Paper Tester
- Plastic and Rubber Testing Equipments
- Protective Material Testing Equipments
- Mask Testing Equipments
- Protective Glove Tester
- Protective Clothing Tester
- Metallogaphic Testing Equipment
- Metallogaphic Cutter
- Metallogaphic Polishing and Grinding Machine
- Metallogaphic Polisher
- Fabric and Yarn Testing Equipments
- Yarn and Fiber Tester
- Lab Dyeing Machine and Finishing Machine
- Flammability Tester
- Abrasion Tester
- Color Fastness Tester
- Pilling Tester
- Fabric and Textile Tester
- Strength Tester
- Mechanical Property Testing Equipments
- Torsion and Bending Testing Machine
- Impact and Compression Testing Machine
- Dynamic Fatigue Testing Machine
- Horizontal Tensile Testing Machine
- Hydraulic Universal Testing Machine
- Electronic Universal Testing Machine
Jinan Xinghua Instruments Co.,Ltd.Free·1YRS
XHS-19 SPI Vinyl Plastic Film Flammability Tester
NegotiableUpdate on November 05
- Model
- Nature of the Manufacturer
- Other
- Product Category
- Plastic and Rubber Testing Equipments
- Place of Origin
- City, Province
Overview
XHS-19 SPI Vinyl Plastic Film Flammability Tester
Product Details
Vinyl Plastic Film Flammability Tester is suitable for testing the flame retardant property of polyethylene plastic film materials. The testing scope is mainly non-rigid and unsupported polyethylene plastic film materials, including transparent, translucent and opaque materials.Includes flat, convex, cast or surface-treated materials.
Principle:
Under prescribed conditions, sample with fixture clamping, the Angle of 45 ° inclined to put, specimen ignition, record of sample spacing on 45 degrees of bevel to 6 'burning time, burning rate to calculate sample.
（CPSC）16 CFR Part 1611
Project | Specification |
Test chamber
| 30cmX25cmX37cm,There are five 20mm air holes on each side of left and right sides |
Sample holder | 45° |
Sample fixture | Length 11 ", width 4 15/16", slot width 1 1/2 ", 1 "end bending length, width of 3 7/8", bending Angle 45 ° |
Mark line spacing | 6" |
Distance of burner from sample surface | 9/16" |
Flame length | 1/2" |
fuel gas | Butane |
Sample size | 3"x9" |
Volume(WxDxH) | 46x29x52cm |
Weight(about) | 20Kg |
Power source | AC 220V 50Hz 3A |
Similar Product Recommend