Welcome Customer !

Membership

Anhui Yunlong Food Machinery Co., Ltd.
Free Member ·1YRS
,
Other

Main Products: 输送机械

Xwboo>Products
Product Categories

Anhui Yunlong Food Machinery Co., Ltd.Free·1YRS

  • E-mail

    yunlong@yunlong.cn

  • Phone

  • Address

    No. 888 South Bridge Road, Jieshou City, Anhui Province

Contact Now

Roller

Model
Nature of the Manufacturer
Other
Product Category
Conveyor equipment series
Place of Origin
City, Province
Overview
Roller
Product Details


Yunlong Group has a complete set of production lines for idlers, and various types of conveying equipment produced by Yunlong Food Machinery Co., Ltd. use self-produced idlers. As the company has introduced advanced technology equipment, it employs technical experts to ensure the various types of rollers produced. Quality standards, and get the customer's consistent praise, greatly reducing the roller failure rate, extending the life of the roller.

Roller is an important part of the belt conveyor. It accounts for 35% of the total cost of a belt conveyor, resulting in more than 70% resistance, so the quality of the roller is particularly important. The role of the roller is to support the conveyor belt and the weight of the material. Roller operation must be flexible and reliable. Reducing the friction between the conveyor belt and the idler roller plays a key role in the life of the conveyor belt, which accounts for more than 25% of the total conveyor cost. Although the idler is a small component in the belt conveyor and the structure is not complicated, it is not easy to make a high-quality idler. Yunlong's production roller has been widely praised by customers after its use, which fully demonstrates that Yunlong roller is of high quality.

The rollers are categorized as self-aligning rollers, buffer rollers, slotted rollers, and parallel rollers according to their use. The function of the aligning roller is to correct the deviation of the belt conveyor. Usually, the rotary groove-shaped aligning roller is installed on the heavy load section of the conveyor, and the parallel aligning roller is installed on the idle section. The buffer roller is applied to the tailstock according to the actual situation. When receiving the material, the impact of the material on the belt can be reduced, which is beneficial to the service life of the long belt. The grooved roller is generally composed of two side rollers and a flat roller. The groove angle is generally 30 degrees. For the detachable belt conveyor, the three rollers of the groove roller are hinged together. Called the articulated roller. The parallel roller is generally a long roller, which is installed at the lower end of the pressure so it is called the lower roller.

The roller is divided into two types, steel and plastic roller. Roller bearing seats are cast iron, steel stamped and phenolic plastic.

The roller seal is divided into steel and plastic. Their seals are internally filled with grease. The quality of the idler directly affects the power consumption of the belt conveyor and the life of the belt. Therefore, dust-proof seal is reliable and good lubrication is an important standard of use.