，-
Phone
0632-5586093
-
Address
Tengzhou Economic Development Zone, Zaozhuang City, Shandong Province
Product Categories
Shandong Lunan Machine Tool Equipment Co., LtdFree·1YRS
CLK6140D2CNC Lathe
NegotiableUpdate on November 07
- Model
- Nature of the Manufacturer
- Other
- Product Category
- CNC Lathe
- Place of Origin
- City, Province
Overview
CLK6140D2
Product Details
Item | Unit | Technical parameter | ||||
CLK6140D/1 | CLK6140D/2 | |||||
Scope of work | Swing over bed | mm | φ400 | |||
Maximum rotation diameter on slide | mm | φ 170 / cross slide with "t" groove φ one hundred and fifty | ||||
Support length between two centers | mm | 750 | 1000 | 750 | 1000 | |
Maximum turning length | mm | 550 | 860 | 550 | 860 | |
Principal axis | Maximum spindle speed | r/min | 48-1600/Level 12 | Two gears：80-400；400-2000 | ||
Spindle through hole diameter | mm | φ81 | φ51 | |||
Bar diameter | mm | φ76 | φ46 | |||
Spindle end type | D8 | A6 | ||||
Taper of spindle taper hole | Metric system90（1:20） | MT6 | ||||
Spindle motor power | KW | 5.5 | 5.5 | |||
Tool carrier | Number of tool positions of electric tool holder | hold | 4（Standard configuration） | 4（Standard configuration） | ||
Cutter bar size | mm | □25×25 | □25×25 | |||
Trip | X-axis stroke | mm | 230 | 230 | ||
Z-axis stroke | mm | 550/860 | 550/860 | |||
Feed | X-axis rapid movement | m/min | 6 | 6 | ||
Fast movement of Z axis | m/min | 8 | 8 | |||
Tailstock | Tailstock sleeve diameter | mm | φ55 | φ55 | ||
Taper of tailstock quill | MT4 | MT4 | ||||
Tailstock sleeve | mm | 150 | 150 | |||
trip | ||||||
Guide | Width of bed guide rail | mm | 300 | 300 | ||
type | Hard rail | Hard rail | ||||
Accuracy | X / Z positioning accuracy | mm | 0.03/0.04 | 0.03/0.04 | ||
X / Z repeat positioning accuracy | mm | 0.012/0.016 | 0.012/0.016 | |||
Other | Net weight of machine tool | kg | 1800 | 1900 | 1800 | 1900 |
Area covered | mm | 2000×1100 | 2320×1100 | 2000×1100 | 2320×1100 | |
| Standard configuration | Select configuration |
Gsk-980tdb servo system | FANUC、KND、HNC、Siemens |
Equal CNC system | |
Manual three jaw chuck φ 200（K40D/1） φ 250（K40D/2） | Ordinary manual three jaw chuck φ 250； Ordinary manual four jaw chuck φ three hundred and twenty |
Variable frequency two gear manual rotary chuck speed regulation | Hydraulic pneumatic hollow, medium solid φ 200、 φ 250 three jaw and two jaw power chuck (k40d / 1) |
Main motor: ordinary three-phase asynchronous motor 5.5kw | Six position electric tool holder |
Four station lifting free electric tool holder | Cross slide with "t" type cutter slot |
Plastic pasting of large chute and horizontal chute | electronic handwheel |
Hａnd operated ordinary tailstock | Manual tool following rest and center rest |
Hａnd pressure lubrication pump | Hydraulic and pneumatic automatic tailstock |
Fixed electronic handwheel | Automatic intermittent forced lubrication pump |
Ordinary incandescent working lamp | 7.5kW motor |
Similar Product Recommend
