-
Phone
0632-5586093
-
Address
Tengzhou Economic Development Zone, Zaozhuang City, Shandong Province
Membership
Help
Shandong Lunan Machine Tool Equipment Co., LtdFree·1YRS
0632-5586093
Tengzhou Economic Development Zone, Zaozhuang City, Shandong Province
Item | Unit | Technical parameter | ||
Scope of work | Swing over bed | ㎜ | φ400 | |
Maximum rotation diameter on slide | ㎜ | φ400 | ||
Support length between two centers | ㎜ | 1000 | 1500 | |
Maximum turning length | ㎜ | 820 | 1320 | |
Principal axis | Maximum spindle speed | r/min | Third gear:21-210;66-560;162-1620 | |
Spindle through hole diameter | ㎜ | φ77 | ||
Bar diameter | ㎜ | φ75 | ||
Spindle end type | D8 | |||
Taper of spindle taper hole | Metric system90(1:20) | |||
Spindle motor power | KW | 5.5 | ||
Tool carrier | Number of tool positions of electric tool holder | hold | 4(Standard configuration) | |
Cutter bar size | ㎜ | □25×25 | ||
Trip | 4 (standard configuration) | ㎜ | 245 | |
Z-axis stroke | ㎜ | 820 | 1320 | |
Feed | X-axis rapid movement | m/min | 6 | |
Fast movement of Z axis | m/min | 8 | ||
Tailstock | Tailstock sleeve diameter | ㎜ | φ75 | |
Taper of tailstock quill | MT5 | |||
Tailstock sleeve stroke | ㎜ | 150 | ||
Guide | Width of bed guide rail | ㎜ | 385 | |
Type | Hard rail | |||
Accuracy | X / Z positioning accuracy | ㎜ | 0.03/0.04 | |
X / Z repeat positioning accuracy | ㎜ | 0.012/0.016 | ||
Other | Net weight of machine tool | kg | 2100 | 2150 |
Area covered | ㎜ | 2500×1370 | 3000×1370 |
Standard configuration | Select configuration |
Gsk-980tdb servo system | Fanuc, knd, HNC, GT, Siemens and other CNC systems |
Manual three jaw chuck φ two hundred | Ordinary manual three jaw chuck φ 250; Ordinary manual four jaw chuck φ three hundred and twenty |
Variable frequency three gear manual rotary chuck speed regulation | Hydraulic pneumatic hollow, medium solid φ 200、 φ 250 three jaw and two jaw power chuck |
Main motor: frequency conversion 5.5kw | Six position electric tool holder |
Four station lifting free electric tool holder | Manual tool following rest and center rest |
Plastic pasting of chute | Hydraulic and pneumatic automatic tailstock |
Hand operated ordinary tailstock | electronic handwheel |
Automatic intermittent electric lubrication pump | |
Fixed electronic handwheel | |
Tubular work lamp | |
Common cooling, one water outlet | |
Manual chip tray | |
Double sliding door semi protective |